Kenton Pro Solo mk3 Converter

The Pro Solo mk3 is highly configurable and is the ideal converter for anyone looking to incorporate an analogue synthesizer, vintage or otherwise, into their MIDI setup. The CV output can operate at 1V/Oct, Hz/Volt or 1.2V/Oct. The scaling and tuning are adjustable, to accommodate any unruly synths. The Gate output can work at several different voltage levels, and can also be set to work a S-trig instead. The three continuously variable auxiliary outputs are presented on 3.5mm jack sockets; and can be configured to respond to MIDI CCs, velocity, aftertouch, clock and more. In addition to this, the MIDI OUT port can be switched to output Sync24, so your vintage Roland equipment can join in as well. What’s new or different about the Mk3? - Aux 2 & Aux 3 are now continuously variable analogue outputs and are presented on 3.5mm jack sockets - Expanded selection of Controllers available for the Aux outputs - The Aux outputs now have adjustable slew rate (rise/fall time) to enable you to smooth out any controller jumps - Built-in ADSR envelope generator (the controls for which can be assigned to MIDI CCs) - Drum Trigger mode – Aux outputs can be set to produce a velocity-variable trigger pulse for drum synths, each with its own dedicated trigger note - Dual clock dividers, which can be used simultaneously on different outputs, including the DIN socket when not used as MIDI out - Variable gate-off time for re-trigger (multiple trigger) - 32 program memories which can store and recall setups - MIDI Program Changes can be used to recall setups - Pre-loaded setups for many of the most popular synths - Pitchbend range increased to 48 notes up & down - Flash upgradable using SysEx when updates become available - 32 bit ARM processor - Brushed aluminium case with black text