Active Direct Injection Boxes
209142
- 12x built in speaker cab models based on our Engl cabinets
- 4x Power amp models with adjustable presence
- 10x microphone models with adjustable placement
CAD 340.60
253913
- Runs on 9VDC — internally converted to 24V to be virtually unclippable
- Onboard headphone amplifier powerful enough to drive high impedance headphones cleanly
- Extremely flat frequency response
CAD 426.20
252680
- · Converts 1/4in unbalanced input to XLR balanced output.
- · GND Lift on XLR to help reduce hum.
- · Passive device, no power source required.
- · Flat frequency response from 20Hz-20kHz
CAD 222.90
202209
(2)
- Active DI Box for general purpose and multimedia applications
- Custom-built MIDAS transformer for highest signal integrity
CAD 73.10
194478
(3)
- +/- 0.25dB from 25Hz - 44kHz
- +/- 1dB from 12.5Hz - 63kHz
- Phantom power, 4.5mA @ +48VDC
CAD 633.05
246286
- Versatile Functionality
- Commitment-Free Recording
- Studio-Grade Components
CAD 408.35
189191
- Exceptional headroom & dynamic range
- Retains the natural sound of the instrument
- Use with stereo sources or multiple instruments
CAD 640.15
211985
- Custom-wound CineMag USA output transformer
- Rugged aluminum construction
- Pad: Variable from -3 to -30dB
CAD 272.85
256194
- Transformer-balanced active stereo DI box
- Converts instrument signals into microphone signals without signal loss
- Ideal solution for connecting instruments directly to microphone preamps
CAD 665.15
256193
- Two-channel active instrument preamp and re-amping unit
- Independent signal paths for instrument preamp and re-amping
- Custom-made CineMag USA transformers in each signal path (inputs and outputs)
CAD 800.20
249213
- Balancing and impedance matching for guitar, bass, keyboards & synthesizers
- Eliminates ground loop hum thanks to galvanic transformer isolation
- 4 independent DI boxes in a solid 19" housing (1U)
CAD 665.15
243244
- Active direct box with superior frequency responce to conventional transformers
- Operates on a 9-volt battery or phantom power from a mixer
- Phase reversal and ground lifting switches
CAD 207.15
243496
- Re-Amping / Tone Sampling DI Box
- Input level adjustable
- Galvanic isolation of the inputs and outputs
CAD 331.70
234165
- Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
- Fully transformer-isolated design ensures electrical separation between PA and stage equipment
- Balanced line input on Neutrik* XLR and high impedance input and
CAD 89.60
216052
(2)
- Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
- Ultra-flat frequency response due to renowned Behringer OT-1 transformers
- Allows direct connection to speaker outputs with up to 3,000 Watts
CAD 151.55