Beyerdynamic MPC 22 WS (white)
Boundary Microphone
CHF 229.00
MSRP: CHF 240.00
MSRP: CHF 240.00
Free delivery in Switzerland
Product # | 105180 |
Brand | Beyerdynamic |
Category | Boundary Microphones | Brand Category | Beyerdynamic - Boundary Microphones |
Series | Beyerdynamic MPC Beyerdynamic MPC 22 |
Release date | December 2007 |
Availability | Will be ordered for you as quick as possibleNotify me |
Description
- condenser, semi-cardioid, for istallation, white
- Condenser boundary microphone (semi-cardioid)
for ceiling or desktop installation
white
- Aimable half-cardioid polar pattern
- High gain-before-feedback
- Flat, wide range frequency response
- High-quality reproduction of speech
- Unobtrusive design
- Ceiling or tabletop mounting
- Fast and easy installation
The MPC 22 acoustical boundary microphone is designed
for mounting into tabletops and ceilings. The halfcardioid
polar pattern is aimable and assures highgain-
before feedback. The high sensitivity guarantees
a constant output level even from long distance
sources. Elastic bearing rings achieve mechanical
isolation from the mounting surface and therefore
offer effective sound isolation of the microphone.
The MPC 22 is designed for applications such as
tele/video conferencing, recording or amplification
of round table discussions and wherever the microphone
needs to be as unobtrusive as possible.
- Condenser boundary microphone (semi-cardioid)
for ceiling or desktop installation
white
- Aimable half-cardioid polar pattern
- High gain-before-feedback
- Flat, wide range frequency response
- High-quality reproduction of speech
- Unobtrusive design
- Ceiling or tabletop mounting
- Fast and easy installation
The MPC 22 acoustical boundary microphone is designed
for mounting into tabletops and ceilings. The halfcardioid
polar pattern is aimable and assures highgain-
before feedback. The high sensitivity guarantees
a constant output level even from long distance
sources. Elastic bearing rings achieve mechanical
isolation from the mounting surface and therefore
offer effective sound isolation of the microphone.
The MPC 22 is designed for applications such as
tele/video conferencing, recording or amplification
of round table discussions and wherever the microphone
needs to be as unobtrusive as possible.
Attributes
Product Details
|
Properties
- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Semi-cardioid
- Open circuit voltage at 1 kHz (0dB = 1V/Pa): 15 mV/Pa = -36.5 dBV
- Nominal impedance: 200 Ohm
- Load impedance: > 1000 Ohm
- Connector: 3-pin XLR
- Length: 76/67 mm
- Shaft diameter: M 20 x 1.5 thread
- Head diameter: 30 mm
- Weight without cable: approx. 70 g
- Frequency response: 65 - 20,000 Hz
- Max. SPL at 1 kHz: 124 dB
- S/N ratio rel. to 1 Pa: 60 dB
- A-weighted equivalent SPL: 26 dB
- Power supply: 8 - 52 V phantom power
- Current consumption: 3.4 mA
- Operating principle: Pressure gradient
- Polar pattern: Semi-cardioid
- Open circuit voltage at 1 kHz (0dB = 1V/Pa): 15 mV/Pa = -36.5 dBV
- Nominal impedance: 200 Ohm
- Load impedance: > 1000 Ohm
- Connector: 3-pin XLR
- Length: 76/67 mm
- Shaft diameter: M 20 x 1.5 thread
- Head diameter: 30 mm
- Weight without cable: approx. 70 g
- Frequency response: 65 - 20,000 Hz
- Max. SPL at 1 kHz: 124 dB
- S/N ratio rel. to 1 Pa: 60 dB
- A-weighted equivalent SPL: 26 dB
- Power supply: 8 - 52 V phantom power
- Current consumption: 3.4 mA
Documents (3)
Report incorrect data about this product