Chameleon Labs 7603 XMOD
Single Channel Microphone Pre-amp
CHF 1359.00
MSRP: CHF 1418.20
MSRP: CHF 1418.20
Free delivery in Switzerland
Product # | 198864 |
Brand | Chameleon Labs |
Category | Single Channel Microphone Pre-amps | Brand Category | Chameleon Labs - Single Channel Pre-Amps |
Release date | December 2017 |
Availability | Will be ordered for you as quick as possibleNotify me |
This page contains auto-translated text
Description
The basic circuit design of the 7603 XMOD is based on legendary preamplifiers from the 60s and 70s. The finest UK transformers from Carnhill are also used, which give the signal a very unique vintage character, especially if you drive them harder. After the input transformer, the audio signal passes through a series of carefully crafted circuits. First, the input stage with a newly developed and discretely designed operational amplifier that has fantastically low noise values, high headroom and an extreme bandwidth. Then the five-stage switchable high-pass filter and the semi-parametric 3-band EQ - with cowtail filters for bass and treble and a bell filter for the mids. The operating frequency can be selected with a switching potentiometer. The EQ consciously relies on the proven vintage concept of the 7602, but with new coils specially developed by Chameleon Labs, which are responsible for the sought-after "musical" characteristics of the EQ. Finally, the signal passes through a cleverly designed, adjustable output stage, which ensures minimal noise. On the front of the 7603 XMOD activate, switch on the EQ section , turn the phase and switch on the 48 V phantom power. The Mic/Line/DI input selection is done via internal relays. The DI input (6.35 mm TS jack) is designed with high impedance (100 k[Ohm]) so that an electric guitar, an electric bass or an I/O guitar can be connected directly. On the right side, next to the output potentiometer, there is a quality VU meter with calibrated ballistics, which was specially developed for the 7603 XMOD and can be switched to either input or output.
Attributes
Product Dimensions
| ||||||||||||
Product Details
| ||||||||||||
Dimension
|
Properties
- extremely low-noise preamplification (<125 dBm ON)
- Transmission range: 10 Hz - 20 kHz (-0.5 dB), 10 Hz - 50 kHz (-1 dB)
- Carnhill (UK) input and output transformers
- protected from HF interference
- completely discrete Class A circuit
- transformer-balanced microphone input (XLR)
- Impedance switchable (300 [Ohm]/1200 [Ohm])
- transformer-balanced line input (XLR)
- DI input for high-impedance signal sources (6.35 mm jack)
- Mic/Line/DI input selection via relay-based toggle switches
- Phase switch (polarity)
- 11-stage gain rotary switch (graded in 5 dB steps)
- 48 V phantom power and phase position switchable
- 5-stage switchable high-pass filter (Off, 40 Hz, 80 Hz, 160 Hz, 320 Hz)
- coil-based semi-parametric 3-band EQ, switchable
- Corner or operating frequencies can be selected with multi-stage rotary switches
- VU meter with calibrated ballistics
- transformer-balanced and galvanically isolated line output (XLR)
- Sheet steel housing with 6 mm thick aluminum front panel
- Weight: 6.290kg
- Height: 315mm
- Width: 480mm
- Depth: 44mm
- Transmission range: 10 Hz - 20 kHz (-0.5 dB), 10 Hz - 50 kHz (-1 dB)
- Carnhill (UK) input and output transformers
- protected from HF interference
- completely discrete Class A circuit
- transformer-balanced microphone input (XLR)
- Impedance switchable (300 [Ohm]/1200 [Ohm])
- transformer-balanced line input (XLR)
- DI input for high-impedance signal sources (6.35 mm jack)
- Mic/Line/DI input selection via relay-based toggle switches
- Phase switch (polarity)
- 11-stage gain rotary switch (graded in 5 dB steps)
- 48 V phantom power and phase position switchable
- 5-stage switchable high-pass filter (Off, 40 Hz, 80 Hz, 160 Hz, 320 Hz)
- coil-based semi-parametric 3-band EQ, switchable
- Corner or operating frequencies can be selected with multi-stage rotary switches
- VU meter with calibrated ballistics
- transformer-balanced and galvanically isolated line output (XLR)
- Sheet steel housing with 6 mm thick aluminum front panel
- Weight: 6.290kg
- Height: 315mm
- Width: 480mm
- Depth: 44mm
Specifications
- Input noise
- <-125 dBm
- Transmission range
- 10 Hz - 20 kHz (-0.5 dB), 10 Hz - 50 kHz (-1 dB)
- Entrances
- Microphone
- XLR, transformer balanced, shielded against HF interference, impedance switchable: 300 [Ohm] or 1200 [Ohm], 48 V phantom power switchable
-Line
- XLR, transformer balanced, shielded against HF interference, impedance: 10 k[Ohm]
- TUE
- TRS jack (6.35 mm), high impedance, for connecting passive electric guitars, I/O guitars, electric basses etc., impedance: 100 k[Ohm]
- Reinforcement
- Type
- Class A circuit, discrete design
- Microphone
- +20 dB - +70 dB, 11-stage rotary switch (scanned in 5 dB steps)
-Line
- 30 dB - +20 dB, 11-stage rotary switch (increments of 5 dB)
- EQ
- circuit
- based on coils
- High pass filter
- 15 dB/octave, corner frequency switchable: 40 Hz, 80 Hz, 160 Hz, 320 Hz or off
-Bass
- Cowtail filter, ±15 dB adjustable, operating frequency switchable: 35 Hz, 60 Hz, 110 Hz or 220 Hz
- In the middle
- Bell filter, ±15 dB adjustable, operating frequency switchable: 360 Hz, 700 Hz, 1.6 kHz, 3.2 kHz, 4.8 kHz or 7.2 kHz
- Heights
- Cowtail filter, ±15 dB adjustable, operating frequency switchable: 3.4 kHz, 4.9 kHz, 7 kHz, 12 kHz or 16 kHz
- Exit
- Type
- XLR, transformer balanced, galvanically isolated, impedance: 600 [Ohm]
- Maximum output level
- +28 dBu
- Show
- Operation
- VU meter lights up
- Control
- LED (red) - input signal overdriven
- LED (red) - output signal overdriven
- Miscellaneous
- Power supply
- internal switching power supply, primary voltage 100-240 VAC, quiescent current consumption 0.5 W
- Housing
- Sheet steel with 6 mm thick aluminum front panel, dimensions: 48.0 x 31.5 x 4.4 cm, weight: 5.13 kg
- <-125 dBm
- Transmission range
- 10 Hz - 20 kHz (-0.5 dB), 10 Hz - 50 kHz (-1 dB)
- Entrances
- Microphone
- XLR, transformer balanced, shielded against HF interference, impedance switchable: 300 [Ohm] or 1200 [Ohm], 48 V phantom power switchable
-Line
- XLR, transformer balanced, shielded against HF interference, impedance: 10 k[Ohm]
- TUE
- TRS jack (6.35 mm), high impedance, for connecting passive electric guitars, I/O guitars, electric basses etc., impedance: 100 k[Ohm]
- Reinforcement
- Type
- Class A circuit, discrete design
- Microphone
- +20 dB - +70 dB, 11-stage rotary switch (scanned in 5 dB steps)
-Line
- 30 dB - +20 dB, 11-stage rotary switch (increments of 5 dB)
- EQ
- circuit
- based on coils
- High pass filter
- 15 dB/octave, corner frequency switchable: 40 Hz, 80 Hz, 160 Hz, 320 Hz or off
-Bass
- Cowtail filter, ±15 dB adjustable, operating frequency switchable: 35 Hz, 60 Hz, 110 Hz or 220 Hz
- In the middle
- Bell filter, ±15 dB adjustable, operating frequency switchable: 360 Hz, 700 Hz, 1.6 kHz, 3.2 kHz, 4.8 kHz or 7.2 kHz
- Heights
- Cowtail filter, ±15 dB adjustable, operating frequency switchable: 3.4 kHz, 4.9 kHz, 7 kHz, 12 kHz or 16 kHz
- Exit
- Type
- XLR, transformer balanced, galvanically isolated, impedance: 600 [Ohm]
- Maximum output level
- +28 dBu
- Show
- Operation
- VU meter lights up
- Control
- LED (red) - input signal overdriven
- LED (red) - output signal overdriven
- Miscellaneous
- Power supply
- internal switching power supply, primary voltage 100-240 VAC, quiescent current consumption 0.5 W
- Housing
- Sheet steel with 6 mm thick aluminum front panel, dimensions: 48.0 x 31.5 x 4.4 cm, weight: 5.13 kg
Report incorrect data about this product