Close
Mobile phone
  • +41 41 910 41 34

Radial SAT-2 Stereo Signal Attenuator

Monitor Controller
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
  • Radial SAT-2 Stereo Signal Attenuator
CHF 181.00
MSRP: CHF 229.00
Free delivery in Switzerland
Stereo Audio Attenuator & Monitor Controller

It is a passive stereo audio device that provides you with a transparent level control wherever you may need it.
Product Rating5.0 out of 5 | 1 review |   Write a review

Description

The SAT-2™ is a passive stereo audio device that provides you with a transparent level control wherever you may need it, either at the output of a pair of high-gain mic preamps, or between your recording interface and a pair of powered speakers as a compact desktop monitor controller.


Ultra-quiet monitor controller

When using the SAT-2 as a monitor controller, simply connect it in between your playback device and a pair of powered speakers for an easy-access master volume control. Mute and mono switches allow you to silence the outputs or check mixes for mono phase compatibility, while a handy dim switch with adjustable level control allows you to temporarily lower the output volume without losing the main volume setting.


Attenuation in the studio

The SAT-2 can also be used to attenuate signals before sending them to your audio interface, so you can drive your mic preamps hard for coloration without clipping the inputs of the digital audio converter. A high quality 4-pole rotary knob ensures consistent L-R tracking over the entire range of the trim pot, fully maintaining the left-right balance of stereo sources.

1. MONO: Sums the left and right outputs to mono

2. MUTE:Silences the outputs of the SAT-2

3. MASTER LEVEL: Sets the overall output level Passes signal at unity gain (no attenuation) when turned fully clockwise

4. DIM ON: Used to reduce output levels temporarily without affecting the setting on the master level control

5. DIM LEVEL: Sets the amount of signal attenuation applied when Dim On is engaged

6. OUTPUTS: XLR outputs for a pair of powered speakers or the inputs of a recording interface

7. INPUTS: TRS ¼” or XLR inputs are available for the left and right channels

8. NO SLIP PAD: Provides electrical & mechanical isolation and prevents the unit from sliding around

SAT-2 Applications:

- Use the SAT-2 as a monitor controller

Connect between your audio interface and powered speakers, utilizing the level control as well as the dim and mute switches.


- Attenuate the output of a hot mic preamp or compressor

Use the trim control on the SAT-2 to avoid overloading or clipping the inputs of your recording device, while retaining the character of your preamps cranked up to their sweet spot.


- Use the SAT-2 for parallel effects processing

Take the output of a mic preamp into the SAT-2, engage the mono switch, and connect one of the SAT-2 outputs directly to your recording interface, and the other to an effects device and then to a second recording track. You can then adjust the blend between the two tracks in your DAW.


- Attenuate stereo outputs for live or broadcast use

Use the SAT-2 to trim down the output of an aux on a mixing console and feed production audio to video cameras or field recorders.


- Add a level control to a multi-room PA system

Interface between the aux output of a PA mixer and powered speakers in another room in the venue, providing local volume control for each zone.

Attributes

Product Dimensions
Depth 76mm
Width 163mm
Height 108mm
Product Details
Product Number 214910
Brand Radial
Category Monitor Controller
Brand Category Radial - Controllers
Relevancy rank 29 of 37
Date April 2020
Dimension
Weight 0.68kg
Box Width 163mm

Properties

- Level control for a pair of powered speakers
- Attenuates hot signal levels to prevent clipping
- Passive audio circuit, no power required
- Transparent operation without signal coloration

- Weight: 0.680kg
- Height: 108mm
- Width: 163mm
- Depth: 76mm

Specifications

Specifications

- Audio circuit type: Passive audio signal path
- Number of channels: 2
- Frequency response: 20Hz to 20kHz
- Dynamic range: >141dB
- Gain: 0dB
- Total harmonic distortion: >0.0005% @ 0dBu
- Intermodulation Distortion: >0.001% @ 0dBu
- Phase Deviation: 0° @ 20Hz, 0° @ 1kHz, +2° @10kHz
- Input Impedance: 8 kΩ
- Output Impedance: 1.8 kΩ
- Common Mode Rejection Ratio: >80dB
- Noise: -115dBu
- Maximum Input: >+ 26dBu

Features

- Mono Sum, Level Control
- Input Connectors: XLR, 1/4"
- Output Connectors: XLR

General

- Construction: 14-gauge steel chassis and outer shell
- Size (L x W x D): 5" x 3.25" x 2" (12.7 x 8.3 x 5cm)
- Weight: 1.5lb (0.68kg)
- Shipping size (L x W x D): 6.4" x 4.25" x 3" (16.3 x 10.8 x 7.6cm)
- Shipping weight: 1.8lb (0.8kg)
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
- Warranty: Radial 3-year, transferable

Reviews (1)

Overall reviewProduct Rating
Operation:  Product Rating
Features:  Product Rating
Sound:  Product Rating
Product Rating
1 customer
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Overall reviewProduct Rating
Operation:  Product Rating
Features:  Product Rating
Sound:  Product Rating
Good gear

Pros:
Small footprint
Precise contols
No noise
No noticeable signal tampering
VERY useful DIM feature
Solid build / good rubber pad to avoid scratching surfaces or slide away


Cons:
Black front panel with grey labels or reversed - not really the best choice.
Height is a bit more than one rack unit - pity
Non-detended pot (as most units in this price range)

Otherwise; typical Radial quality product - can recommend!

Brand

Radial Engineering is based in Port Coquitlam, BC, a short drive from Vancouver. A longstanding reputation for bringing reliable and tough-as-nails problem solvers to the market means you will see Radial products on stages and in studios world-wide. These products include the world's finest direct boxes, splitters and audio interfacing devices. As the maker of some of the best pro audio gear in the business Radial’s products have graced the stages and studios of many of music's biggest acts including Rush, U2, Bruce Springsteen, AC/DC, Billy Joel, Paul McCartney, Al Schmitt, and Elliot Scheiner, among many others. In business since 1992, the company is responsible for what are arguably two of the best direct boxes on the market, the JDI and the J48. Radial products are also regularly chosen by audio/video integrators for use in non-music applications but where pristine audio is required. With approximately 100 employees, Radial boasts in-house research and development, and engineering and production departments where all the products are proudly Canadian-made. An extensive network of dealers and distributors makes Radial product available around the world.
Report incorrect data about this product
Recommended accessories
Quantity:-+
Why MusiX?
  • Free delivery in Switzerland from CHF 50.-
  • 3 Year Warranty in Switzerland
  • 25,000 products in stock
  • Payment After Delivery Or By Installment
  • Daily deliveries
Your Settings
Discount base: 1. Previous MusiX price, 2. Recommended list price
MusiX chatHave a question?[[missing key: down arrow]]
Press Enter to send
MusiX chat