Schweiz
EN
  • Log in

Seydel HA1510 REV MK II

Seydel
CHF 1419.00
CHF 1542.35
Soon in backorder
Free delivery (CH)
2. Generation, vintage technology, incredibly warm sound, full-body harmonica amplifier.

Many amps have been developed exclusively for the electric guitar or electric bass - the Hyperamp, on the other hand, has been developed from the ground up for harmonica players. This is how the very special harp sound is achieved, which once opened the door for the harmonica, which was actually too quiet, to become the "mother of the band" (Otis Spann, pianist of the Muddy Waters Band). This captivating sound still inspires players and listeners today and many players are still searching for their sound. The Hyperamp effortlessly follows all the nuances that the player performs with his harp and microphone, making it the ideal extension of the sound chain. The Hyperamp HA1510 REV MK II is a hand-wired class A amplifier and has an output of 15 (tube) watts and a specially designed 10-inch Jensen speaker. This power is sufficient for smaller stages or jam sessions. With its combination input (high impedance: jack / low impedance: XLR) you can use almost any microphone - the 3-band tone control works very effectively and helps to refine the sound. Thanks to its adaptability for different microphone types, the AUX-in input and the built-in spring reverb, the Hyperamp is a universal genius for harmonica players! For the 2nd version (MarK II), we have made some fundamental technical changes based on the feedback we received from customers on the first version of the Hyperamp (you can find the complete user manual under Tips): 1) The gain/volume control now allows you to produce the distorted Chicago sound even at low volume levels - high-impedance or low-impedance microphones can be connected equally - the respective "crunch" can be dialed in individually. 2) The new AUX-IN input on the front panel allows the connection of mp3 players, etc., so that you can play along to playbacks with the Hyperamp without the need for an additional stereo system (adapter cable not included). 3) With an additional foot on the underside at the front, the amplifier can be set up at a slight angle: This allows the player to hear itself better and the sound projection to the front is optimal. 4) The built-in spring reverb is also reverb-operated: Real vintage reverb for authentic Chicago blues harmonica sound. There is an optional send/return effect for looping in external effect units. 5) Line-out or additional speaker? Both are possible - the new Hyperamp is therefore at home on all speakers! - 6) Combined INPUT: jack/XLR: All microphone types (high or low impedance) can be used with the Hyperamp!

  • - Rated output power: 15VA at 4 / 8 Ohm (switchable) *
  • - Loudspeaker: 10'' Jensen P10R 8 Ohm -SPECIAL DESIGN-Alnico
  • - Power amplifier: Class A (2 x EL84)
  • - Level indicator: EM84 (magic eye), on the front panel
  • - Combined input: 6.3 mm jack socket, -10 dBu at 1 MOhm or XLR socket, -30 dBu at 200 Ohm
  • - Effects loop: parallel, with level (reverb) control**
  • - Line-out output: jack
  • - Tone control: 3 Bänder
  • - Front controls: INPUT (combined), BASS, MIDDLE, TREBLE, GAIN, VOLUME, AUX-IN (cable not supplied), EFFECT/REVERB**, stand-by switch, power indicator lamp, power switch
  • - Rear controls: Mains connection with mains fuse and spare fuse (alternating current: 220V/50Hz or 110V/60Hz), EFF RET and EFF SEND sockets, XLR socket DI OUT, EXTERNAL speaker socket, INTERNAL speaker socket, 4 / 8 Ohm switch
  • - Reverb circuitry: 1 x EZ81, 2 x EL84, 2 x ECC81, 2 x ECC83, 1 x EM84
  • - Reverb coil: Accutronics, 3 springs
  • - Dimensions (w x h x d in mm): 484 x 480 x 260 mm
  • - Weight: 14.5 kg

Product Dimensions
Depth
260mm
Width
484mm
Height
480mm
Product Details
Product Number
176971
Brand
C.A. Seydel Söhne
Series
Hyper
Category
Harmonica Amplifier
Brand Category
Seydel - Amplifiers
Date
November 2014
Dimension
Weight
14.5kg
Box Depth
566mm
Box Width
484mm
Box Height
336mm
Gross Weight
16.9kg
Related Products