Login with Facebook
(1)
(5)Strymon Deco V2 Tape Saturation and Doubletracker
MSRP: CHF 421.35
| Product # | 239134 |
| Brand | Strymon |
| Category | Modulation Pedals | Brand Category | Strymon - Modulation Pedals |
| Release date | July 2022 |
| Availability |  In backorderNotify me
|
| Shop | Availability |
|---|---|
| Giebenach BL |
In backorder |
Description
Analog Richness
Give your sound the smooth and warm qualities of analog tape, along with the enhanced touch sensitivity and playing dynamics that are intrinsic to the inner workings of tape machines. Achieve incredible transparency at low levels, with reduced high frequency spikes and a harmonically rich low end. Turn up the Saturation to increase the amount of tape drive, dynamic compression and distortion. Deco is perfectly suited for a last-in-chain, “always on” sweetening effect. Everything sounds better on tape. Want to push the limits of tape beyond what was originally possible? Use Deco as a tape-style transparent overdrive—crank the Saturation all the way up to “peg the meters” and gently overload the machine’s input.
Tonal Control
Deco’s Tape Saturation side features controls for dialing in everything from light, transparent saturation all the way to smooth, overdriven tape distortion. The Saturation knob allows for a wide range of tones that range from subtle saturation and compression at lower levels, to transparent tape overdrive at its upper limits. An adjustable Volume control for Deco’s Tape Saturation lets you raise the output volume when using Deco as a boost, or dial it back to achieve unity gain. Our new generation of Deco features a dedicated Tone knob that lets you adjust the tone of your Tape Saturation, from darker to brighter. The new generation of Deco also introduces a Voice switch for an expanded range of available sounds. The Voice switch has two settings: classic: produces the response and saturation characteristics of 2-track mastering reel to reel tape machines. cassette: employs an auto level control (ALC) process common to many high-end cassette tape recorders, resulting in a musically compressed, fat tone and a great-feeling response.
Double Or Nothing
Go back to the early days of recording studios, where a few creative audio engineers discovered a new world of augmented sound by pushing the limits of studio tape machines. By inventing automatic doubletracking, they introduced echo, flanging, and chorus to the world of recorded music. Intensify and widen your sound with Deco’s Doubletracker controls. Turn the Lag Time to obtain classic slapback tape echo, spacious doubletrack chorusing, and mind-bending tape flanging. Add random modulation with the Wobble control and go from very subtle movement to more extreme undulations—just like having a recording engineer vary the speed of the machine. Add warm dimensionality and luscious tape saturation to your signal. Teleport the tones of yesteryear to your board. Deco is a jack of all trades capable of creating a huge range of beautiful, distinctive, and enveloping vintage sounds.
Full Control
In addition to Lag Time, Deco’s Doubletracker features additional controls to help you achieve a wide variety of tape based effects. The Blend control sets the mix level between Deco’s Lag Deck and Reference Deck, and can be lowered to hear more of the Reference Deck for less doubletracking, or raised if you want to hear more of the doubletracking effect. Deco’s Wobble knob adds random tape speed based modulations to the Lag Deck. Go from very subtle movement to more extreme undulations — just like having a recording engineer vary the speed of the machine. Wobble is super handy to increase the depth of the modulation effect you hear when Lag Time is set to act as a tape flanger/chorus, or use it to add modulation to the Lag Deck when set as a slapback or tape echo.
Not Just A Phase
Adjusts phase and internal routing to customize tone and low-end response: sum: decks are in phase invert: Lag Deck is phase inverted bounce: right Lag Deck is bounced to left input for stereo ping-pong or mono double-echo
Delay, Modulation, And More
Simply by turning Deco’s Lag Time knob, you can unlock a whole variety of organic, tape based modulation and delay effects. When adjusting the delay offset between Deco’s reference deck and the Lag Deck with the Lag Time knob, you can achieve everything from tape flanging at lower settings (-.3 to 3ms), increase that a bit for lush tape chorusing (3 to 50ms), followed by snappy slapback delay at longer delay times (50 to 150ms), all the way to spaced out tape echoes (150 to 500ms).
Stereo To The Max
Deco gives you the option for extremely wide stereo imaging to broaden and intensify the sound of your stereo rig. Wide Stereo Mode sends the mono input (summed if using a stereo input) to the Left channel through the Reference Deck, and to the right channel via the delayed Lag Deck to create an adjustable stereo spread. The Blend control acts like a pan control by adjusting the relative levels of the two tape decks.
Your Personal Engineer
Press and hold the Doubletracker Bypass footswitch to achieve a recording studio-inspired through-zero flange effect. This engages a “virtual audio engineer” manning the faders and tape reels to create a smooth and predictable through-zero flange experience on the fly. After releasing the footswitch, the controls are smoothly returned to their previous settings.
Deco’s Tape Saturation smooths out your sound with familiar and delicious tape compression and saturation, while fattening your tone with subtle tape-driven transparent overdrive.
The Doubletracker provides the power to shift your sound in many ways, easily allowing you to achieve syrupy slapback tape echoes, psychedelic tape flanging, and gorgeous tape chorusing sounds.
Attributes
Product Details
| ||||||||||||
Dimension
|
Properties
- • FX include deliciously compressed/transparently overdriven tape saturation, plus doubletracking FX (syrupy slapback and longer (up to 500m/s) warm tape delays, gorgeous tape chorus, psychadelic tape flanging)
- • The tape saturation and doubletracker circuits sections are independent- two pedals in one!
- • Independent control of (i) tape saturation level and decks' output volume (ii) reel to reel lag time + reel varispeed ('wobble') • Blend (of 2 tape decks) control and three Doubletracker blend types (Sum, Invert, Bounce) to individually tailor your effects • Secondary controls allow control of High Trim, Low Trim, Auto-Flange Time, Wide Stereo Mode and +/- 3dB Boost/Cut • Hold down the bypass switch for a studio-inspired through-zero auto-flange!
- • Two signal routing modes: Standard and Wide Stereo
- • Expression pedal input with selectable control over any knob parameter TRS stereo input (with stunning new JFET preamp) and output, plus MONO/STEREO input switch on the back of the unit
- Full MIDI control, MIDI clock sync and 300 presets
- USB port for updates and MIDI over USB
- TRS MIDI jacks: allow bi-directional MIDI communication with a single cable using the Conduit interface
- Editor/librarian support via USB
- Weight: 0.530kg
Brand
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
Strymon Deco V2 Tape Saturation and Doubletracker
#239134
