Zaor Miza Junior MKII (grey wengé)
Studio Furniture
CHF 439.00
Free delivery in Switzerland
Product # | 202192 |
Brand | Zaor |
Category | Studio Furniture | Brand Category | Zaor - Studio Furniture |
Series | Zaor Miza |
Release date | June 2018 |
Availability | Will be ordered for you as quick as possibleNotify me |
Unit: 1 piece(s)
This page contains auto-translated text
Description
The MIZA Junior from ZAOR Studio Furniture is a work table with dimensions of height 782 mm, width 1250 mm and depth 700 mm when closed, 950 mm when open.
At the front below the table top there is a pull-out with an internal width of 1129 mm which can be mounted at 7 different heights. The lowest interior height of the pull-out is 51mm, the largest possible interior height is 147mm. The legroom changes accordingly, which is a maximum of 691 mm and a minimum of 595 mm.
At the back below the table top there is a storage area for cables and power supplies as well as for placing screens on it. For this purpose, cover plates in three parts can be removed from the rear part of the table top. This allows one or two screens to be placed in different positions.
The height of the shelf can also be adjusted using a shelf system with metal pins inserted into the holes provided. There are 7 steps, each 9mm apart.
The table top is reinforced in the rear area to make it easier to remove the covers
enable.
The table is further stabilized by a brace attached to the rear area and a cross bar on the floor.
The table is made of 18mm thick chipboard with melamine coating from Kronospan and is delivered flat packed and disassembled. Assembly is carried out using Fürth furniture kits, whereby all metal pins are screwed into threaded inserts installed at the factory. It
No wood screws are used.
An approx. 30mm wide solid wood edge (ash) is glued to the front edge of the table to protect the table top from damage caused by chairs or the like. to protect.
At the front below the table top there is a pull-out with an internal width of 1129 mm which can be mounted at 7 different heights. The lowest interior height of the pull-out is 51mm, the largest possible interior height is 147mm. The legroom changes accordingly, which is a maximum of 691 mm and a minimum of 595 mm.
At the back below the table top there is a storage area for cables and power supplies as well as for placing screens on it. For this purpose, cover plates in three parts can be removed from the rear part of the table top. This allows one or two screens to be placed in different positions.
The height of the shelf can also be adjusted using a shelf system with metal pins inserted into the holes provided. There are 7 steps, each 9mm apart.
The table top is reinforced in the rear area to make it easier to remove the covers
enable.
The table is further stabilized by a brace attached to the rear area and a cross bar on the floor.
The table is made of 18mm thick chipboard with melamine coating from Kronospan and is delivered flat packed and disassembled. Assembly is carried out using Fürth furniture kits, whereby all metal pins are screwed into threaded inserts installed at the factory. It
No wood screws are used.
An approx. 30mm wide solid wood edge (ash) is glued to the front edge of the table to protect the table top from damage caused by chairs or the like. to protect.
Attributes
Studio Furniture attributes
| ||||||||||||||
Product Details
| ||||||||||||||
Dimension
|
Report incorrect data about this product