Signal Splitters/Combiners

Passive splitter and DI box

Absolutely no signal loss or hum

High-impedance LEHLE TRANSFORMER HZ with phase and ground switch

Dual Channel Microphone Splitter

4ch transmitter, with balanced i/o, uses shielded cat-5

Line level splitter sends single input signal to 2 outputs

Custom-built MIDAS transformer for highest signal integrity

8 Channel Splitter Isolator

Line level splitter sends single input signal to 5 outputs

High headroom design offers superior sound quality

Passive design does not require any power supply

Mic splitter two direct / one isolated

Powerful microphone splitter, with either single or double output decoupling. Thanks to completely passive signal paths and equipment with Jensen transformers achieve this microphone splitter a uniquely high audio quality.

Passive Line-Splitter/Mixer.

Mix 4 stereo input channels down to a stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications.

With the help of a PAN-05 can connect two microphones on a mixer channel, if not the number of available channels on the mixer is sufficient.

Use the Pro to Split or Combine SPLITCom balanced low impedance microphone signals.

Low Distortion with Wide Frequency Response, Two Functions In One Box: Combines And / Or Splits

Passive two-channel Mikrofonsplitbox

Through the parallel connector can be looped through the phantom power, so that even condenser mics will work.

Passive two-channel Mikrofonsplitbox

Through the parallel connector can be looped through the phantom power, so that even condenser mics will work.

Ultra-low noise 8 in/2 out line mixer and 2 in/8 out line splitter

Ultra-flexible and easy-to-use distribution splitter for commercial sound applications

Dual mode 2-In / 4 out or 1-in / 8-out operation

2 ultra-low noise line inputs with separate link output connectors

Three stereo analog inputs for keyboards

Digital USB connection for laptop soft-synths

On-board sustain and effects loop footswitches

4ch receiver, balanced outs, line-level transformers, uses shielded cat-5

4ch receiver, balanced outs, mic-level transformers, uses shielded cat-5

4ch transmitter, balanced i/o, line-level transformers, uses shielded cat-5

4ch transmitter, balanced i/o, mic-level transformers, uses shielded cat-5

Geräuschloser Betrieb durch lüfterloses Konzept

2 Pegelregler

Lautsprecher-Einschaltverzögerung

Auto-Switcher and USB interface