EN
- Log in
Ampeg SVT-3 PRO
CHF 1090.00
CHF 1674.45
In stock
Ships immediately from our stock (CH)
Free delivery (CH)
| Product # | 103505 |
| Brand | Ampeg |
| Series | Ampeg Pro |
| SubSeries | Ampeg Pro Verstärker |
| Category | Bass Head |
| Brand Category | Ampeg - Bass Heads |
Bass Guitar Amplifier
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. That's where the SVT-3PRO comes in. There's a reason this amp is a best seller-it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
It's all about tone. The SVT-3PRO's Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices" for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that's not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel" for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
- - Record and reamp with the powerful and modern sound variant of the legendary SVT bass amplifier
- - Fine-tune your sounds using the built-in FX rack with noise gate, tone control and an on/off switch for the tweeter horn
- - Shape bass sounds using the five selectable frequencies of the mid control and the 9-band graphic equalizer
- - Immediate access to 26 different recording chains based on combinations of different microphones, loudspeakers and studio peripherals
- Tube Drive Control
- - 1/4" and Neutrik Speakon Outputs
- - Input Peak LED
- - Input Pad and Bright Switch
- - Mute Switch and Tuner Out
- RMS Power Output (8 Ohms): 275-Watts
- - RMS Power Output (4 Ohms): 450-Watts
- - Preamp: Tubes (3 x 12AX7)
- - Driver Tubes: 1 x 12AX7, 1 x 12AU7
- - Power Amp: Solid-State
- - Tone Controls: 3-Band
- - Mid Tone Control: 5-Position
- - Graphic EQ: Yes, 9-Band
- - Ultra Low/High Boosts: Yes
- - Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
- - Effects Loop: Yes
- - Preamp Out/Power Amp In: Yes
Output Power Rating:
450 watts rms @ 4 ohms, 3% THD
275 watts rms @ 8 ohms, 3% THD
Signal to Noise Ratio:
80 dB (20 Hz–30 kHz), ref: 1% THD+N into a
4 ohm load with –20 dB stimulus (“normal”)
Maximum Gain:
63 dB @ 1 kHz, tone controls centered
Tube Complement:
12AX7 (4), 12AU7 (1)
Tone Controls:
Bass: +12 / –12 dB @ 50 Hz
Midrange: +15 / –15 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +14 / –19 dB @ 5 kHz
Graphic EQ Level +10 / –10 dB
Graphic EQ Range:
33 Hz: +15 / –15 dB
80 Hz: +8 / –8 dB
150 Hz: +8 / –8 dB
300 Hz: +8 / –8 dB
600 Hz: +8 / –8 dB
900 Hz: +8 / –8 dB
2 kHz: +8 / –8 dB
5 kHz: +9 / –9 dB
8 kHz: +10 / –10 dB
Bright Switch +6 dB @ 2 kHz
Ultra Hi Switch +6 dB @ 5 kHz
Ultra Lo Switch +2.5 dB @ 50 Hz
–12 dB @ 560 Hz
+1.5 dB @ 5 kHz
Footswitch Jack:
Graphic EQ On/Off, Mute On/Off [Tip = Mute, Ring = EQ]
Power Requirements:
~100–120 VAC, 50–60 Hz, 390 W [Domestic]
~200–240 VAC, 50–60 Hz, 390 W [Export]
450 watts rms @ 4 ohms, 3% THD
275 watts rms @ 8 ohms, 3% THD
Signal to Noise Ratio:
80 dB (20 Hz–30 kHz), ref: 1% THD+N into a
4 ohm load with –20 dB stimulus (“normal”)
Maximum Gain:
63 dB @ 1 kHz, tone controls centered
Tube Complement:
12AX7 (4), 12AU7 (1)
Tone Controls:
Bass: +12 / –12 dB @ 50 Hz
Midrange: +15 / –15 dB @ 220 Hz, 450 Hz,
800 Hz, 1.6 kHz or 3 kHz
Treble: +14 / –19 dB @ 5 kHz
Graphic EQ Level +10 / –10 dB
Graphic EQ Range:
33 Hz: +15 / –15 dB
80 Hz: +8 / –8 dB
150 Hz: +8 / –8 dB
300 Hz: +8 / –8 dB
600 Hz: +8 / –8 dB
900 Hz: +8 / –8 dB
2 kHz: +8 / –8 dB
5 kHz: +9 / –9 dB
8 kHz: +10 / –10 dB
Bright Switch +6 dB @ 2 kHz
Ultra Hi Switch +6 dB @ 5 kHz
Ultra Lo Switch +2.5 dB @ 50 Hz
–12 dB @ 560 Hz
+1.5 dB @ 5 kHz
Footswitch Jack:
Graphic EQ On/Off, Mute On/Off [Tip = Mute, Ring = EQ]
Power Requirements:
~100–120 VAC, 50–60 Hz, 390 W [Domestic]
~200–240 VAC, 50–60 Hz, 390 W [Export]
| Product Dimensions | |
|---|---|
| Depth | 220mm |
| Width | 480mm |
| Height | 580mm |
| Product Details | |
|---|---|
| Product Number | 103505 |
| Brand | |
| Series | |
| SubSeries | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Bass Head | |
| Date | December 2011 |
| Dimension | |
|---|---|
| Weight | 11.79kg |
| Box Depth | 612mm |
| Box Width | 480mm |
| Box Height | 215mm |
| Gross Weight | 15kg |
Related Products