EN
- Log in
Bose Sub2
CHF 1085.00
CHF 1189.00
In stock
Ships immediately from our stock (CH)
Free delivery (CH)
| Product # | 231509 |
| Brand | Bose |
| Category | Portable Line Array System Subwoofer |
| Brand Category | Bose - Line Array Subwoofers |
Powered Bass Module
A powered, portable bass module, the Sub2 subwoofer combines with virtually any portable PA and delivers low-end performance down to 37 Hz. Its unique 10” × 18” high-excursion neodymium RaceTrack driver allows for an ultra-slim enclosure, delivering performance that rivals traditional round drivers without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the Sub1 subwoofer, Sub2 is the more powerful subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity. You can stack multiple Sub2 subwoofers for even more low end — or to unleash Cardioid Mode for directional bass. With a Sub2, you get a subwoofer that easily fits onstage — and effortlessly fills up the dance floor.
- - Add powerful bass to your portable PA system with low-end range down to 37 Hz
- - Go from vehicle to venue easily with a slim design featuring a unique 10” × 18” high-excursion neodymium RaceTrack driver; performance that rivals traditional round drivers with a smaller footprint
- - Stack multiple Sub2 subwoofers for even more bass or unleash Cardioid Mode for focused, directional performance that steers the bass out front and decreases feedback
- - Combine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity, which delivers both power and audio over a single cable
- - Pair with other powered loudspeakers via line input and output with selectable crossover modes, plus integrated threaded pole mount for use with Bose S1 Pro PA and more
- System Performance:
System Type: Self-powered bass module
Frequency Response (–3 dB): 137 Hz to 180 HzFrequency Range (–10 dB): 29 Hz to 260 HzNominal Vertical Coverage Pattern: 0°
Nominal Horizontal Coverage Pattern: Omnidirectional (with –10 dB rear rejection in Cardioid mode)
Calculated Maximum SPL @ 1 m, continuous: 123.8 dB Calculated Maximum SPL @ 1 m, peak: 129.8 dB
Crossover: 200 Hz
Transducers:
Low Frequency: 1 × RaceTrack low-frequency driver 10" × 18"
Low Frequency Voice Coil Size: 3"
Driver Protection: Dynamic limiting
Amplification:
Type: Class D
Low Frequency Amplifier Channel: 1000W
Cooling: Convection cooling
Onboard Mixer:
Channels: Two
Channel 1 & 2 Input: Audio Type: Combination XLR or 1/4" TRS connector (mic/instrument/line)
Channel 1 & 2 Input: Impedance: 100 KΩ
Channel 1 & 2 Input: Channel Gain: +10 dB to +45 dB; from input to driver, controlled by volume control
Channel 1 & 2 Input: Max Input Signal: +24 dBu
Channel 1 & 2 Output: Audio Type: XLR connector, line-level, full-frequency bandwidth
SubMatch Input: Audio Type: Bose proprietary multi-pin cable
SubMatch Thruput: Audio Type: Bose proprietary multi-pin cable
LED Indicators: Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection, Signal/Clip Indicator
AC Power:
AC Power Input: 100–240 VAC (±20%, 50/60 Hz)
Input: Electrical Type: IEC, SubMatch
Initial turn on inrush current1: 5.2 A at 120 V; 28.6 A at 230 V
Inrush current after AC mains interruption of 5 s: 2.6 A at 120 V; 6.1 A at 230 V
System Type: Self-powered bass module
Frequency Response (–3 dB): 137 Hz to 180 HzFrequency Range (–10 dB): 29 Hz to 260 HzNominal Vertical Coverage Pattern: 0°
Nominal Horizontal Coverage Pattern: Omnidirectional (with –10 dB rear rejection in Cardioid mode)
Calculated Maximum SPL @ 1 m, continuous: 123.8 dB Calculated Maximum SPL @ 1 m, peak: 129.8 dB
Crossover: 200 Hz
Transducers:
Low Frequency: 1 × RaceTrack low-frequency driver 10" × 18"
Low Frequency Voice Coil Size: 3"
Driver Protection: Dynamic limiting
Amplification:
Type: Class D
Low Frequency Amplifier Channel: 1000W
Cooling: Convection cooling
Onboard Mixer:
Channels: Two
Channel 1 & 2 Input: Audio Type: Combination XLR or 1/4" TRS connector (mic/instrument/line)
Channel 1 & 2 Input: Impedance: 100 KΩ
Channel 1 & 2 Input: Channel Gain: +10 dB to +45 dB; from input to driver, controlled by volume control
Channel 1 & 2 Input: Max Input Signal: +24 dBu
Channel 1 & 2 Output: Audio Type: XLR connector, line-level, full-frequency bandwidth
SubMatch Input: Audio Type: Bose proprietary multi-pin cable
SubMatch Thruput: Audio Type: Bose proprietary multi-pin cable
LED Indicators: Standby, Phase/Pattern selection, Input EQ selection, Output EQ selection, Signal/Clip Indicator
AC Power:
AC Power Input: 100–240 VAC (±20%, 50/60 Hz)
Input: Electrical Type: IEC, SubMatch
Initial turn on inrush current1: 5.2 A at 120 V; 28.6 A at 230 V
Inrush current after AC mains interruption of 5 s: 2.6 A at 120 V; 6.1 A at 230 V
| Product Details | |
|---|---|
| Product Number | 231509 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Portable Line Array System Subwoofer | |
| Date | August 2021 |