Fischer Amps Hardwired In Ear Body Pack

- Two direct, balanced XLR inputs, no special cable required (can also be connected asymmetrically - Significantly better sound than wireless in-ear systems - Two switchable modes (mono mix / stereo) - 2 x 40 mW output power with limiter - Volume and panorama/mix controls - Robust aluminum housing - Stainless steel belt holder - Power supply connection (lockable) for - Connecting external DC power supply (available optionally). - Supply with 9V block battery or battery - Running time with alkaline battery approx. 12h, with rechargeable battery approx. 8h Technical data Dimensions L x W x H (in mm): 127 x 82 x 30 Weight: 290g Inputs: 2 x Neutrik XLR socket 3-pin with locking Output: 3.5mm stereo jack sockets Frequency response: 30Hz - 20KHz +/- 2dB Minimum connection impedance of the receiver: 12 ohms per side Input impedance: 15kOhm Nominal input level: 0 dB - +2dB (limited at +6 dB) Nominal input level balanced: 0 dBV Max. input level balanced: +4 dBV Limitation of the input signal: from +5 dBV Max. output power at 20 ohms: 40 mW per channel Max. operating current: 40 mA Power supply: 9V block alkaline battery or 8.4V NiMH battery DC input socket: External input voltage DC 9V (internal contact +, external contact -) Battery life: approx. 8 h with 270mAh battery, approx. 12 h with alkaline battery (depending on listening volume) operation manual