George L's Cables Solderless Plugs (.155 cable diameter, angled plug)

It is as easy as that: 1) just cut the cable 2a) for straight plugs, loosen the small retaining screw so that the cable can be plugged into the plug. use a screwdriver to do this. 2b) for angled connector, unscrew the jack connector. you can do this by hand 3) insert the cable into the hole and push it in a little firmly. This is the contact point of your signal. 4a) For straight plugs, tighten the retaining screw again until the cable contact and then turn it one to one and a half times. This is the ground. 4b) with angled plugs, push the cable firmly into the hole provided for this purpose and screw the jack plug back on. This is how the grounding is created.