Profiler PowerHead (Black)
CHF 1555.00
1 piece(s)
EN
- Log in
Kemper Profiler Power Head + Remote (Black)
CHF 1939.00
CHF 2138.80
Soon in backorder
Free delivery (CH)
| Product # | 180477 |
| Brand | Kemper |
| Category | Guitar Amplifier Head |
| Brand Category | Kemper - Heads |
Accessories
Recommended accessories
Profiler Remote
the Profiler Remote is the ultimate remote control for your Profiler and features a large and bright display, four pedal inputs and intuitive double-click control of stomps and effects. Only one cable is needed and all performances and rigs can be controlled instantly without any further programming. Additionally, it activates the looper in its profiler.
Large backlit display
Sturdy metal case
Five buttons allow direct access to the five different rigs in a performance
Direct access to tuner, tap tempo and looper via dedicated buttons
Exclusive 30 second looper effect
7m (21ft) cable included, cable lengths up to 100 meters can be realized. Single cable for power and data transmission
Up to 4 pedals can be connected to the remote
Dimensions: 42cm (w) x 18cm (d) x 7.5cm (h)
Weight: 2.9kg
Profiler Power Head
The Power Head version with a built-in 600 watt power amp. The Profiler Power Head comes with several hundred high-quality amp profiles under the hood. These profiles are suitable for live and studio musicians alike. Dozens of stomp box emulations and effects are bundled with lifetime free feature updates. These updates include new features, optimizations, new effects and profiling content. Complimentary access to our Rig Exchange, a cloud-based service with over 5000 additional amp profiles.
As part of KEMPER PROFILER operating system version 12.0 it is free for all KEMPER PROFILER owners.
The collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever rate and tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values (e.g. from 8th notes to triplets) without glitching or losing the timing.
Analog Inputs:
- Front INPUT: ¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
- ALTERNATIVE INPUT: ¼ inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
- RETURN: XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
Analog Outputs:
- MAIN OUTPUT L and R: XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
- MONITOR OUTPUT: ¼ inch TS unbalanced with ground lift, output level: +4 dBu
- DIRECT OUTPUT/SEND: ¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
- HEADPHONE Output: ¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
- Digital Input: S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit) with RCA phone connectors for coax cables (master only)
- Speaker Output: 600 Watts at 8 Ohm, 300 Watts at 16 Ohm
- MIDI IN/OUT/THRU: 5-pin DIN connectors
- SWITCH/PEDAL: ¼ inch TRS, each for mono/stereo switch or expression pedal (10 kohms min, 100 kohms max. impedance)
- Height: 21,7 cm (8.54 inches)
- Width: 37,8 cm (14.88 inches)
- Depth: 17,3 cm (6.81 inches)
- Weight: 6,50 kg (14.33 pounds)
- Front INPUT: ¼ inch TS unbalanced, dynamic range >108 dB, impedance 1 megohms
- ALTERNATIVE INPUT: ¼ inch TRS balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
- RETURN: XLR balanced, ¼ inch balanced with ground lift, dynamic range =105 dB, impedance 825 kohms
Analog Outputs:
- MAIN OUTPUT L and R: XLR balanced, ¼ inch TS unbalanced with ground lift, output level: XLR +4 dBu, TS +4 dBu
- MONITOR OUTPUT: ¼ inch TS unbalanced with ground lift, output level: +4 dBu
- DIRECT OUTPUT/SEND: ¼ inch TS unbalanced with ground lift, output level: +4 dBu, output dynamic range: >108 dB
- HEADPHONE Output: ¼ inch TRS stereo, 32-600 ohms, 330 mW @ 32 ohms, 220 mW @ 600 ohms
- Digital Input: S/PDIF Input/Output 44.1/48/88.2/96 kHz (24 bit) with RCA phone connectors for coax cables (master only)
- Speaker Output: 600 Watts at 8 Ohm, 300 Watts at 16 Ohm
- MIDI IN/OUT/THRU: 5-pin DIN connectors
- SWITCH/PEDAL: ¼ inch TRS, each for mono/stereo switch or expression pedal (10 kohms min, 100 kohms max. impedance)
- Height: 21,7 cm (8.54 inches)
- Width: 37,8 cm (14.88 inches)
- Depth: 17,3 cm (6.81 inches)
- Weight: 6,50 kg (14.33 pounds)
| Key attributes | |
|---|---|
| Power | 600W |
| Channels | 1 |
| Reverb | Yes |
| Including Footswitch | Yes |
| Guitar Amplifier Head attributes | |
|---|---|
| MIDI Interface | Yes |
| Effects Processor | Yes |
| External FX Loop | Yes |
| Line Input | Yes |
| Recording Output | Yes |
| Connection For External Speaker | Yes |
| Headphone Output | Yes |
| Footswitch Connection | Yes |
| Product Details | |
|---|---|
| Product Number | 180477 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Guitar Amplifier Head | |
| Date | July 2015 |
| Dimension | |
|---|---|
| Box Depth | 520mm |
| Box Height | 285mm |
| Gross Weight | 13.04kg |
Related Products
Reviews
(7)
View different language product reviews (6)
Ich benutze nun den Kemper Profiling Amp über ein Jahr und bin immer noch begeistert! Es braucht ein wenig Zeit um sich in die Bedienung und Funktionalität des Amps einzuarbeiten, da der Umfang der Features ziemlich gross ist. Egal ob über Studio Monitore, Gitarren Cab, PA oder Kopfhörer gespielt, mit den richtigen Profiles klingt der Kemper grossartig. Aus meiner Sicht lohnt es sich auch in kommerzielle Profiles zu investieren. Dazu empfehle ich, das Kemper Forum zu benutzen. Dort findet man auch sonst hilfreiche Tipps und Hinweis. Dieser Verstärker ist übrigens auch als Bass Amp geeignet, vorausgesetzt es werden entsprechende Profiles benutzt. Das Pedalboard ist sehr praktisch und lässt sich einfach nutzen. Durch die hochwertige und stabile Verarbeitung sicher auch bestens für den Live Einsatz geeignet.