Close
Mobile phone
  • +41 41 910 41 34

RME Babyface Pro FS

USB Interface
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
  • RME Babyface Pro FS
CHF 726.00
MSRP: CHF 819.00
Free delivery in Switzerland
24-Channel 192 kHz bus-powered USB Audio Interface
Product Rating5.0 out of 5 | 1 review |   Write a review

Description

+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.
3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms.
Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB.
6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...).
All the above improvements were achieved without raising the units power consumption.
K-slot for theft protection.

Supplied items

- Cable USB 2.0 A plug to right angle B plug, length 39” (1m)
- Cable USB 2.0 C plug to right angle B plug, length 39” (1m)
- MIDI breakout cable
- Carrying box
- Manual

Attributes

Key attributes
Audio Interface Type USB
Total Inputs 4
Total Outputs 4
Midi In/Out No
USB Interface attributes
Mic Inputs 2
Line Inputs 2
Instrument/HiZ Inputs 2
Analog Outputs 2
Digital Inputs SPdif , ADAT , Optical
Digital Outputs ADAT , SPdif
+48V Phantom Power Yes
Product Details
Product Number 210969
Brand RME
Category USB Interface
Brand Category RME - USB Interfaces
Relevancy rank 48 of 174
Date May 2020

Properties

Input: XLR, electronically balanced
Input impedance balanced: 2 kOhm, 5.2 kOhm with PAD
Input impedance unbalanced: 1 kOhm, 2.6 kOhm with PAD
Signal to Noise ratio (SNR): 113,7 dB RMS unweighted, 117 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 18 Hz – 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 7 Hz – 45.8 kHz
Frequency response @ 192 kHz, -1 dB: 5 Hz – 88 kHz
With PAD active : -0.1 dB 8 Hz, -0.5 dB < 4 Hz, -1 dB < 3 Hz
THD: < -112 dB, < 0.00024 %
THD+N: < -108 dB, < 0.00035 %
THD @ 30 dB Gain: < -115 dB, < 0.00016 %
THD+N @ 30 dB Gain: < -100 dB, < 0.001 %
Channel separation: > 110 dB
Gain range: -11 dB up to +65 dB
Maximum input level XLR, Gain 0 dB: +8 dBu, PAD +19 dBu
Maximum input level XLR, Gain 65 dB: -57 dBu, PAD -46 dBu

Reviews (1)

Overall reviewProduct Rating
Operation:  Product Rating
Features:  Product Rating
Sound:  Product Rating
Product Rating
1 customer
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Product Rating
nobody
Overall reviewProduct Rating
Operation:  Product Rating
Features:  Product Rating
Sound:  Product Rating
Top quality

My second RME card. Top quality, robust, highly configurable, superb high end audio.
I had a technical issue and it has been solved very quickly, so five ***** to the support as well.

Report incorrect data about this product
Recommended accessories
Quantity:-+
Why MusiX?
  • Free delivery in Switzerland from CHF 50.-
  • 3 Year Warranty in Switzerland
  • 30,000 products in stock
  • Payment After Delivery Or By Installment
  • Daily deliveries
Your Settings
Discount base: 1. Previous MusiX price, 2. Recommended list price
MusiX chatHave a question?[[missing key: down arrow]]
Press Enter to send
MusiX chat