Skip to main contentSkip to navigationSkip to search

Shure KSM141SL Stereo Set / KSM141ST

Shure
CHF 952.00
CHF 1059.00
Will be ordered for you as quick as possible
Free delivery (CH)

This product is composed of the following parts

he Shure KSM141 is a large diaphragm end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments. Performance Characteristics - Extended frequency response - Low self noise - Exceptional reproduction of low-frequency sounds - Can withstand high sound pressure levels (SPL) - High output level - No crossover distortion - Uniform polar response - Superior common mode rejection and suppression of radio frequency interference Applications Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed. - Acoustic instruments -- such as piano, guitar, drums, percussion, strings - Wind instruments -- brass and woodwind - Low frequency instruments -- such as double bass, electric bass, kick drum - Overhead miking -- drums or percussion - Ensembles -- choral or orchestral - Room ambiance pick-up -- guitar amplifier or drums Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

  • Features:
  • - A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
  • - Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar® diaphragm for superior transient response
  • - Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • - Premium electronic components, including gold-plated internal and external connectors
  • - Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • - Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • - Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • - Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
  • - KSM141/SL with windscreen and carrying case, champagne finish
  • - KSM141/SL STPAIR with two KSM141 mics, two windscreens, one carrying case, champagne finish
  • Specification:
  • Cartridge Type:
  • Permanently Biased Condenser
  • Frequency Response:
  • 20 to 20,000 Hz
  • Directional Polar Pattern:
  • Cardioid/Omnidirectional
  • Output Impedance:
  • 150 ohms (actual)
  • Attenuation Switch:
  • 0 dB,15 dB, or 25 dB attenuation
  • Low Frequency Response Switch:
  • Flat; -6 db/octave below 115 Hz;
  • -18 dB/octave below 80 Hz
  • Phantom Power:
  • 48 Vdc +/- 4 Vdc (IEC­268­15/DIN 45 596), positive pins 2 and 3
  • Current Drain:
  • 4.65 mA typical at 48 Vdc
  • Common Mode Rejection:
  • >50 dB, 20 Hz to 20 kHz
  • Polarity:
  • Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
  • Dimensions and Weight:
  • 20 mm (0.8 in.) diameter, 146 mm (5.75 in.) long;
  • 156 grams (5.5 oz.)
  • Sensitivity (typical, at 1000 Hz; 1 Pa = 94 dB SPL)
  • ­-37 dBV/Pa
  • Self­noise (typical, equivalent SPL; A-weighted, IEC 651)
  • 14 dB
  • Maximum SPL:
  • 5000 ohm load (Attenuator on): 145 (160, 170) dB
  • 2500 ohm load (Attenuator on): 139 (154, 164) dB
  • 1000 ohm load (Attenuator on): 134 (149, 159) dB
  • Output Clipping Level:
  • 5000 ohm load: 15 dBV
  • 2500 ohm load: 9 dBV
  • 1000 ohm load: 3 dBV
  • Dynamic Range:
  • 5000 ohm load: 131 dB
  • 2500 ohm load: 125 dB
  • 1000 ohm load: 120 dB
  • Signal to Noise Ratio:
  • 80 dB
  • *20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
  • **S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

General Information
Manufacturer information
Shure Incorporated
5800 West Touhy Ave
60714 Niles IL
United States
Product Details
Product Number
163184
Brand
Shure
Series
KSM
Category
Small Diaphragm Microphone
Brand Category
Shure - Small Diaphragm Microphones
Relevancy rank in Category Small Diaphragm Microphone
35 of 77
Date
May 2017
Dimension
Weight
0.9kg
Related Products