• +41 61 813 11 79
Tempo Limitato
Commenti dei clienti
Next
- Severino L. | 18.10.2018
Next
- Andrea G. | 28.01.2020
Next
- Christian S. | 19.02.2019
Next
- Norma C. | 17.08.2019
Next
- Guido S. | 28.05.2019

Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)

  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
  • Pedaltrain Novo 32 Pedalboard / PT-N32-SC (with soft case)
CHF 153.00 | UVP: CHF 189.00
Per esempio:

Quantità:
The Novo series is Pedaltrain's new five-rail pedal board system

Thanks to Pedaltrain's new modified rail system and open front design, mounting pedals and power supplies is easier than ever.
Product Rating4.0 da 5 | 1 recensione |   Scrivi una recensione

Descrizione

Novo 32's five-rail design is perfect for players who use true-bypass switchers or need an extra rail to accommodate a variety of pedal configurations.

Included with purchase is 160" of Pedaltrain's professional grade hook-and-loop pedal fastener and plenty of zip ties for securing cables.

Novo 32 is available for purchase with either Pedaltrain's redesigned fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or Pedaltrain's new professional-grade tour case.

Pedaltrain's new one-size-fits-all power supply mounting brackets (not included) are available for purchase as needed. (Voodoo Lab Mounting Kit: PT-VDL-MK; Universal Mounting Kit: PT-UNI-MK).

Prodotti forniti

160 inches (407 cm) Pedaltrain's professional grade adhesive backed hook-and-loop for securing pedals
Assortment of zip ties for organizing and securing cables

Proprietà

Frame:
32x14.5x3.5 inches (81.2x36.8x8.9 cm)
- Featherweight, aircraft grade aluminum
- 6.0 lbs. (2.72 kg)

- Altezza: 89mm
- Larghezza: 812mm
- Profondità: 368mm

Specifiche

Soft Case:
Exterior: 21x8.5x6 inches
High quality metal-toothed zipper, durable cordura nylon construction, padded handle, reinforced stress points

Recensioni (1)

Riepilogo totaleProduct Rating
Funzionamento:  Product Rating
Features:  Product Rating
Product Rating
nessuno
Product Rating
1 cliente
Product Rating
nessuno
Product Rating
nessuno
Product Rating
nessuno
Riepilogo totaleProduct Rating
Funzionamento:  Product Rating
Features:  Product Rating
Decent, but could need DIY depending on your power
After some research, I chose the Pedalboard Novo 32 with a soft case on which to build a fairly large pedal board with 10-12 pedals.

The aluminum construction of the frame is decent, and well made and painted matte black. Fairly light too, although feels plenty solid enough. The pack comes with two rolls of velcro like 'hook and loop' material - one fuzzy and one burry - as well as some black plastic cable ties. All good, although 3M Duraloc would be even better than the Pedaltrain own brand velcro. The velcro works okay at keeping the pedals on the board most of the time (even in transport) but for rubber backed pedals like the Boss footswitches it's not very effective in the longer run as the velcro peels off the rubber easily.

I chose the soft case configuration because I worked out that the more expensive hard touring case would be very, very heavy. The soft case is okay quality, with no external pockets for cables etc. (If you want that, you have to buy the premium soft case, which doesn't look worth the money, to my mind). Unless you're putting your pedal board in the hold on planes or intensively touring, the cheaper soft case option should be adequate: despite a lack of much padding there's some rigidity in the top and bottom of the case. The best feature is the large, heavy duty zip that runs around the rim of the soft case. Be aware that to actually use the pedal board you'll probably want to lift it out of the soft case each time.

The one thing I found irksome about the board was the lack of any pre-drilled holes for power supplies in the aluminum frame underside. I'm using a Strymon Zuma power supply with a mounting kit specifically for use with Pedaltrain boards, so was surprised at this - and that neither Pedaltrain nor Strymon clearly impart this information on their website descriptions. So, if you want to mount whichever power supply you have beneath the board, bear in mind that you will have to drill your own holes. Ideally with a vertical drill press, which in my case worked well with no problems. Otherwise, you can use the velco 'hook and loop' to mount the power supply. But for larger, heavier power supplies that may not be a durable solution.

Documentazione (1)

Segnalare dati errati relativi a questo prodotto
Accessori e prodotti correlati
MusiX Giebenach
MusiX AG
Sägeweg 15
4304 Giebenach BL
giebenach@musix.ch
Tel: 061 813 11 79

Chiuso il 01.06.2020
Lu-Ve: Solo ritiro 13:30-17:30
Sa: Solo ritiro 10h-16h

Più informazioni ...chiudere
Quantità:-+
Perché MusiX?
  • Spedizione gratuita in Svizzera a partire da CHF 50.-
  • 30 giorni Soddisfatti o Rimborsati
  • 3 anni di garanzia in Svizzera
  • Consulenza personalizzata
  • 25,000 prodotti in stock
  • Pagamento dopo la consegna
  • Consegne giornaliere
Commenti dei clienti
Next
- Luca S. | 26.01.2018
Next
- Francesco C. | 20.01.2018
Next
- Cesare V. | 29.01.2018
Next
- Severino L. | 18.10.2018
Next
- Läthitia R. | 28.09.2018
Impostazioni
Base di sconto: 1. Prezzo MusiX precedente, 2. Prezzo di listino consigliato
MusiX chatPossiamo aiutarla?
MusiX chat