Vielen Dank für diesen super Service!
DPA 4006C
Kondensator-Grossmembranmikrofon
EUR 2212.40
UVP: EUR 2283.60
UVP: EUR 2283.60
Inkl. MwSt., versandkostenfrei in Deutschland
Artikelnr. | 158579 |
Marke | DPA |
Kategorie | Kondensator-Grossmembranmikrofon | Marken-Kategorie | DPA - Transistor |
Serie | DPA d:dicate |
Markteinführung | Januar 2013 |
Verfügbarkeit | Wird schnellstmöglich für Sie bestellt |
Beschreibung
The Type 4006 is without doubt the most popular Standard Microphone in the Series 4000 Microphones and has since its release in 1982 earned a status as being the worldwide studio standard. It is an omnidirectional condenser microphone with an extremely linear frequency response from 20 Hz to 20 kHz, high sensitivity and a low noise-floor. The 4006 is phantom powered (P48), which together with the extended range of acoustic pressure equalisers and different protection grids turns the 4006 into an extremely cost effective solution. All in all the Type 4006 can be changed into 7 different microphone versions acoustically. The 4006 has gained its reputation through its total transparency in both the near-field and in the diffuse field. A must for any studio.
Wherever a small, lightweight, inconspicuous microphone for top-quality recording is required, the compact design and clean, transparent sound of our versatile 4006C makes it the perfect choice. They are particularly popular as A-B stereo pairs in concert halls where quality recordings can sometimes be compromised by classic architecture.
The 4006C can be mounted, hung or concealed to create clean, transparent recordings. It is ideal in theatres, opera and concert halls or places of worship where there is a live audience, and for film applications, both in the studio and on location. These mics are also popular with musicians for close-miking instruments such as double bass, trumpet and piano. At the same time they are wonderful for ambience miking on soundstages, in sports stadiums and other environments where audience sound needs to be recorded.
The 4006 can be upgraded to a transformerless version, 4006-TL. The upgrade includes a factory-based retrofitting to the DPA 4006-TL with transformerless preamplifier, close-miking grid, DPA 4006-TL type ring, calibration chart and new mic case.
Wherever a small, lightweight, inconspicuous microphone for top-quality recording is required, the compact design and clean, transparent sound of our versatile 4006C makes it the perfect choice. They are particularly popular as A-B stereo pairs in concert halls where quality recordings can sometimes be compromised by classic architecture.
The 4006C can be mounted, hung or concealed to create clean, transparent recordings. It is ideal in theatres, opera and concert halls or places of worship where there is a live audience, and for film applications, both in the studio and on location. These mics are also popular with musicians for close-miking instruments such as double bass, trumpet and piano. At the same time they are wonderful for ambience miking on soundstages, in sports stadiums and other environments where audience sound needs to be recorded.
The 4006 can be upgraded to a transformerless version, 4006-TL. The upgrade includes a factory-based retrofitting to the DPA 4006-TL with transformerless preamplifier, close-miking grid, DPA 4006-TL type ring, calibration chart and new mic case.
Attribute
Produktdetails
|
Eigenschaften
Principle of operation:
Pressure
Cartridge type:
Pre-polarised condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
20 Hz - 20 kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 15 dB(A) re. 20 µPa
Sensitivity, nominal, ±2 dB:
10 mV/Pa; -40 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
Capsule diameter:
16 mm (0.63 in)
Total harmonic distortion (THD):
<0.5% up to 129 dB SPL peak
<1% up to 135 dB SPL peak Preamplifier frequency range:
20 Hz to 40 kHz ±1 dB
Output impedance:
<75 Ohm
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
165 mm (6.5 in)
Max. SPL, peak before clipping:
143 dB SPL peak (f> 200 Hz)
Weight:
150 g (5.29 oz)
Dynamic Range:
Typ. 120 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
79 dB
Connector:
3-pin XLR-M (Standard P48)
Current consumption:
3.40 mA
Pressure
Cartridge type:
Pre-polarised condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
20 Hz - 20 kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 15 dB(A) re. 20 µPa
Sensitivity, nominal, ±2 dB:
10 mV/Pa; -40 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4:
Typ. 27 dB (max. 29 dB)
Capsule diameter:
16 mm (0.63 in)
Total harmonic distortion (THD):
<0.5% up to 129 dB SPL peak
<1% up to 135 dB SPL peak Preamplifier frequency range:
20 Hz to 40 kHz ±1 dB
Output impedance:
<75 Ohm
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
165 mm (6.5 in)
Max. SPL, peak before clipping:
143 dB SPL peak (f> 200 Hz)
Weight:
150 g (5.29 oz)
Dynamic Range:
Typ. 120 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
79 dB
Connector:
3-pin XLR-M (Standard P48)
Current consumption:
3.40 mA
Marke
Melden Sie uns einen Fehler in den Produkt-Informationen