Mit Facebook anmelden
Allerbesten Dank für Ihre Bemühungen, dass nenne ich Kundenservice!!
DPA BLM4060
Tischmikrofon
EUR 632.90
Inkl. MwSt., versandkostenfrei in Deutschland
| Artikelnr. | 139431 |
| Marke | DPA |
| Kategorie | Tischmikrofon | Marken-Kategorie | DPA - Tischmikrofon |
| Serie | DPA d:screet |
| Markteinführung | Januar 2010 |
| Verfügbarkeit |  Wird schnellstmöglich für Sie bestellt |
Beschreibung
- ideal for use in boardrooms, conference facilities, courtrooms, teleconferencing
- optimized to boost speech intelligibility
- works with a wide range of connection adapters and power supplies
The BLM4060 Boundary Layer Microphone is ideal for use in boardrooms, conference facilities, courtrooms, teleconferencing and other applications where excellent vocal pickup is required.
Microphone
The BLM4060 is a transducer designed to work under optimum conditions when placed on a tabletop, but it also performs well on any other hard, flat surface that reflects sound. The microphone element is a prepolarized omnidirectional miniature condenser microphone with a 5.4 mm (0.2 in) vertical diaphragm specially designed for maximum performance. The microphone body consists of a centre rubber disc that holds the microphone element mounted in an elegant stainless steel base. The BLM4060 has a 3 m (10 ft) cable.
Position
The BLM4060 can be very easily placed in essentially any position on the surface, even close to the edge (See graphs & more). Users will benefit from the special characteristics of the surrounding sound field on which the BLM4060 is mounted: a 6 dB gain of direct sound and only 3 dB gain of the diffuse sound. Therefore, the sound captured has both a greater clarity - especially at high frequencies - and speech intelligibility compared to sound captured above the surface.
Accessories
A wide range of connection adapters and power supplies makes it possible to use the BLM4060 with any microphone input. It is delivered with a DAD6001 adapter.
- optimized to boost speech intelligibility
- works with a wide range of connection adapters and power supplies
The BLM4060 Boundary Layer Microphone is ideal for use in boardrooms, conference facilities, courtrooms, teleconferencing and other applications where excellent vocal pickup is required.
Microphone
The BLM4060 is a transducer designed to work under optimum conditions when placed on a tabletop, but it also performs well on any other hard, flat surface that reflects sound. The microphone element is a prepolarized omnidirectional miniature condenser microphone with a 5.4 mm (0.2 in) vertical diaphragm specially designed for maximum performance. The microphone body consists of a centre rubber disc that holds the microphone element mounted in an elegant stainless steel base. The BLM4060 has a 3 m (10 ft) cable.
Position
The BLM4060 can be very easily placed in essentially any position on the surface, even close to the edge (See graphs & more). Users will benefit from the special characteristics of the surrounding sound field on which the BLM4060 is mounted: a 6 dB gain of direct sound and only 3 dB gain of the diffuse sound. Therefore, the sound captured has both a greater clarity - especially at high frequencies - and speech intelligibility compared to sound captured above the surface.
Accessories
A wide range of connection adapters and power supplies makes it possible to use the BLM4060 with any microphone input. It is delivered with a DAD6001 adapter.
Attribute
Produktdetails
|
Eigenschaften
Directional characteristics: Omnidirectional, hemisphere
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element
Frequency range, ± 2 dB: 20 Hz - 14 kHz (with 7 a dB soft boost at 8 kHz)
Sensitivity, nominal, ±3 dB: 20 mV/Pa at 1 kHz; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB)
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
Total harmonic distortion (THD): < 1 % up to 123 dB SPL peak, < 1 % up to 120 dB SPL RMS sine
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: From MicroDot: 30 - 40 ohm. From DAD6001: 100 ohm.
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6011-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot/XLR 3-pin
Microphone weight: 240 g (8.5 oz) excl. cable
Microphone diameter: 100 mm (4 in)
Microphone height: Height: 12 mm (0.5 in)
Cable length: 3 m (10 ft)
Cable color: Black
Cable diameter: 1.6 mm (0.06 in)
Finish: Black rubber disc mounted in stainless steel base
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin/pin 2 on XLR connector
Operating temperature range: -10 to 45°C (14 to 113° F)
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element
Frequency range, ± 2 dB: 20 Hz - 14 kHz (with 7 a dB soft boost at 8 kHz)
Sensitivity, nominal, ±3 dB: 20 mV/Pa at 1 kHz; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB)
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
Total harmonic distortion (THD): < 1 % up to 123 dB SPL peak, < 1 % up to 120 dB SPL RMS sine
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: From MicroDot: 30 - 40 ohm. From DAD6001: 100 ohm.
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6011-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot/XLR 3-pin
Microphone weight: 240 g (8.5 oz) excl. cable
Microphone diameter: 100 mm (4 in)
Microphone height: Height: 12 mm (0.5 in)
Cable length: 3 m (10 ft)
Cable color: Black
Cable diameter: 1.6 mm (0.06 in)
Finish: Black rubber disc mounted in stainless steel base
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin/pin 2 on XLR connector
Operating temperature range: -10 to 45°C (14 to 113° F)
Dokumente (1)
Marke
Melden Sie uns einen Fehler in den Produkt-Informationen
Fehler melden
Haben Sie einen Fehler in der Produktbeschreibung gefunden? Bitte erläutern Sie ihn hier, wir werden umgehend an einer Korrektur arbeiten.
DPA BLM4060
#139431
Verwandte Produkte
