Ich möchte mich mal bedanken für die immer SCHNELLEN Lieferungen und den guten Service!👍😀
Universal Audio 710 Twin-Finity Single-Channel Mic Pre
Ein-Kanal-Mikrofon-Preamp
EUR 999.00
Inkl. MwSt., versandkostenfrei in Deutschland
Artikelnr. | 132120 |
Marke | Universal Audio |
Kategorie | Ein-Kanal-Mikrofon-Preamp | Marken-Kategorie | Universal Audio - Ein-Kanal |
Serie | Universal Audio Preamp |
Markteinführung | März 2012 |
Verfügbarkeit | Wird schnellstmöglich für Sie bestellt |
Beschreibung
he 710 Twin-Finity is a radically new UA pre-amp design which uniquely combines both the classic retro warmth of UA tube design and the transient bite of solid-state in a 2U, half-rack, all-metal chassis. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps.
The key to its sonic flexibility lies in its innovative circuit design, featuring a solid-state transimpedance input amp simultaneously driving separate, phase-aligned tube and solid-state gain stages, which are then summed to a single output.. The mix between the 310 volt single-ended class-A triode tube stage and solid-state transimpedance stageis controlled via the "Blend Knob" labeled "?". Blending is continually variable between 100% tube and 100% solid-state offering a practically infinite range of unique pre-amp tones and the ability to easily dial-in your own signature sound.
Like all our other preamp designs, the 710 features dual gain-stage controls (Gain/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique "Drive" mode allowing you to see how hard you are driving the input stage.
Versatility makes the 710 the perfect preamp partner for any mic collection. Plus, the discrete JFET DI input circuit can also easily handle any electric instrument. Guitar and bass players will especially appreciate the 710s ability to bring out the best of both active and passive pickups. The 710 Twin-Finity is designed and built at UA headquarters in California, and includes a 19" rack-kit for mounting one or two units.
The key to its sonic flexibility lies in its innovative circuit design, featuring a solid-state transimpedance input amp simultaneously driving separate, phase-aligned tube and solid-state gain stages, which are then summed to a single output.. The mix between the 310 volt single-ended class-A triode tube stage and solid-state transimpedance stageis controlled via the "Blend Knob" labeled "?". Blending is continually variable between 100% tube and 100% solid-state offering a practically infinite range of unique pre-amp tones and the ability to easily dial-in your own signature sound.
Like all our other preamp designs, the 710 features dual gain-stage controls (Gain/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique "Drive" mode allowing you to see how hard you are driving the input stage.
Versatility makes the 710 the perfect preamp partner for any mic collection. Plus, the discrete JFET DI input circuit can also easily handle any electric instrument. Guitar and bass players will especially appreciate the 710s ability to bring out the best of both active and passive pickups. The 710 Twin-Finity is designed and built at UA headquarters in California, and includes a 19" rack-kit for mounting one or two units.
Attribute
Produktdetails
| ||||||||||||||
Abmessungen
|
Eigenschaften
General
Inputs Microphone (Female XLR)
Balanced Line (Female XLR)
Unbalanced Instrument (1/4" jack) (D.I.)
Outputs Balanced Line (Male XLR)
Type
Tube & Solid-State Phase-Aligned Tone-Blending Mic Pre & DI
Tube Complement 12ax7
Pad -15dB
High Pass Filter 75Hz
Maximum Power Consumption 160mA @120VAC
20W
Power Requirements 100-240VAC
Dimensions 8.45W x 3.5H x 10.25D
Weight 5.25 lb
Impedance
Mic Input Impedance 2K ohms
Line Input Impedance 10K ohms
Hi-Z Input Impedance 2.2M ohms
Internal Output Impedance 600 ohms
Gain/Levels
Gain Range for Unit -Infinity to 70dBu
Mic Range Gain Pot 10 ~ 60 dBu
Line Range Gain Pot -10 ~ 40 dBu
Hi-Z Range Gain Pot -10 ~ 40 dBu
Maximum Mic Input Level Gain @min SS +18 dBu
Maximum Mic Input Level Gain @min Tube 1% THD -7 dBu dBu +8 dBu w/pad
Maximum Line Input Level Gain @ Min SS +30
Maximum Line Input Level Gain @ Min Tube 1% THD +8 dBu
Maximum Hi-Z Input Level Gain Min SS +18
Maximum Hi-Z Input Level Gain Min Tube 1% THD +8 dBu
Maximum Output Level into 600 ohms +18 dBu
Maximum Output Level into 100k ohms +28 dBu
Tube Clipping Level Same as Max In
Solid-State Clipping Level Same as Max In
Frequency Response
Mic Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Line Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Hi-Z Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Distortion
Min THD+Noise @ +4dBU 0.1% tube 0.005% solid-state
Inputs Microphone (Female XLR)
Balanced Line (Female XLR)
Unbalanced Instrument (1/4" jack) (D.I.)
Outputs Balanced Line (Male XLR)
Type
Tube & Solid-State Phase-Aligned Tone-Blending Mic Pre & DI
Tube Complement 12ax7
Pad -15dB
High Pass Filter 75Hz
Maximum Power Consumption 160mA @120VAC
20W
Power Requirements 100-240VAC
Dimensions 8.45W x 3.5H x 10.25D
Weight 5.25 lb
Impedance
Mic Input Impedance 2K ohms
Line Input Impedance 10K ohms
Hi-Z Input Impedance 2.2M ohms
Internal Output Impedance 600 ohms
Gain/Levels
Gain Range for Unit -Infinity to 70dBu
Mic Range Gain Pot 10 ~ 60 dBu
Line Range Gain Pot -10 ~ 40 dBu
Hi-Z Range Gain Pot -10 ~ 40 dBu
Maximum Mic Input Level Gain @min SS +18 dBu
Maximum Mic Input Level Gain @min Tube 1% THD -7 dBu dBu +8 dBu w/pad
Maximum Line Input Level Gain @ Min SS +30
Maximum Line Input Level Gain @ Min Tube 1% THD +8 dBu
Maximum Hi-Z Input Level Gain Min SS +18
Maximum Hi-Z Input Level Gain Min Tube 1% THD +8 dBu
Maximum Output Level into 600 ohms +18 dBu
Maximum Output Level into 100k ohms +28 dBu
Tube Clipping Level Same as Max In
Solid-State Clipping Level Same as Max In
Frequency Response
Mic Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Line Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Hi-Z Frequency Response 20Hz to 100kHz +/- 0.2 dBu
Distortion
Min THD+Noise @ +4dBU 0.1% tube 0.005% solid-state
Marke
Melden Sie uns einen Fehler in den Produkt-Informationen