Close
Mobile phone
  • +49 7666 61 99 68 0

Crown XTI 4002

Power Amplifier
  • Crown XTI 4002
EUR 1199.00
MSRP: EUR 1449.00
Incl. VAT, free shipping in Germany
Power amplifier, 2x1200W/4Ohm, DSP, USB
This page contains auto-translated text 

Description

There's no debate - when you choose Crown 's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Next Generation Features - Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release - Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning - 3 User- defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application - New system monitoring provides software visibility of AC line voltage and power supply temperature - Integrated cast-aluminum handles for easy handling and enhanced durability - Locking power cord clip provides a secure connection between the amplifier and power cord - Updated HiQnet Band Manager and System Architect control software - Increased number of presets to a total of 50; 49 of which are user definable

Attributes

Product Details
Product Number 151267
Brand Crown
Series XTi
Category Power Amplifier
Brand Category Crown - Power Amplifiers
Relevancy rank 31 of 67
Date February 2015
Dimension
Weight 7kg
Box Depth 605mm
Box Height 419mm
Gross Weight 12.76kg

Properties

Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. PERFORMANCE Sensitivity (for full rated power at 4 ohms) 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz) +0 dB, -1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms) XTi1002/ 2002/4002: 100 dB (A weighted) db Input Impedance (nominal) 20k ohms balanced, 10k ohms unbalanced Maximum Input Signal +22 dBu typical AC Line Voltage and Frequency Configurations 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current (120 VAC amplifier playing 1/ 8 power pink noise into 4 ohms per ch) XTi1002: 6.8A; no more than 38W at idle XTi2002: 8.3A; no more than 38W at idle XTi4002: 10.5A; no more than 38W at idle XTi6002: 15.3A; no more than 180W at idle Operating Temperature 0°C to 40°C at 95% relative humidity (non-condensing) PERFORMANCE Level Two front-panel rotary level controls, one for each channel Power Switch On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen Backlit liquid crystal display that shows preset and processing status Indicators Signal Indicator Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). -10 Indicator Green LED flashes when output signal exceeds -10 dB below clip. -20 Indicator Green LED flashes when output signal level exceeds -20 dB below clip. Ready Indicator Green LED, one per channel, illuminates when the amplifier is ready to produce audio. Clip Indicator Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator Blue LED illuminates when the amplifier has been turned on and has power Input/Output Connectors Input Connectors XLR, one per channel Link/Out Connector Loop-thru signal from input connector for linking another amplifier, one per channel. Output Connectors Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors). HiQnet USB Connector Type B, connects to HiQnet network. Construction Chassis Steel Front Panel Cast-aluminum Cooling Proportional speed fan with front-to-rear airflow. Dimensions XTi 1002/2002/4002: 19" (W) x 3.5" XTi XTi ) x 12.25" (D) 2002/4002: 18.5 lbs ( XTi ) XTi 6002: 24.0 lbs (10.9kg) Shipping Weight XTi 1002/2002/4002: 21.5 lbs (9.8kg)

- Weight: 7.000kg
Report incorrect data about this product
Quantity:-+
Why MusiX?
  • Free delivery from 200 EUR (Germany)
  • 3 Year Warranty
  • 25,000 products in stock
  • Daily deliveries
Your Settings
Discount base: 1. Previous MusiX price, 2. Recommended list price