Fischer Amps Hardwired In Ear Body Pack

- Two direct, balanced XLR inputs, no special cable required (can also be connected asymmetrically
- Significantly better sound than wireless in-ear systems
- Two switchable modes (mono mix / stereo)
- 2 x 40 mW output power with limiter
- Volume and panorama/mix controls
- Robust aluminum housing
- Stainless steel belt holder
- Power supply connection (lockable) for
- Connecting external DC power supply (available optionally).
- Supply with 9V block battery or battery
- Running time with alkaline battery approx. 12h, with rechargeable battery approx. 8h

Technical data
Dimensions L x W x H (in mm): 127 x 82 x 30

Weight: 290g

Inputs: 2 x Neutrik XLR socket 3-pin with locking
Output: 3.5mm stereo jack sockets
Frequency response: 30Hz - 20KHz +/- 2dB
Minimum connection impedance of the receiver: 12 ohms per side
Input impedance: 15kOhm
Nominal input level: 0 dB - +2dB (limited at +6 dB)
Nominal input level balanced: 0 dBV
Max. input level balanced: +4 dBV
Limitation of the input signal: from +5 dBV
Max. output power at 20 ohms: 40 mW per channel
Max. operating current: 40 mA
Power supply: 9V block alkaline battery or 8.4V NiMH battery
DC input socket: External input voltage DC 9V (internal contact +, external contact -)
Battery life: approx. 8 h with 270mAh battery, approx. 12 h with alkaline battery (depending on listening volume)
operation manual