Radial TWIN ISO
Passive Direct Injection Box
EUR 345.00
Incl. VAT, free shipping in Germany
Product # | 113359 |
Brand | Radial |
Category | Passive Direct Injection Boxes | Brand Category | Radial - Passive DI Boxes |
Release date | February 2008 |
Availability | Will be ordered for you as quick as possible |
This page contains auto-translated text
Description
The Radial Twin-Iso is a balanced 2-channel, line-level isolator that has been specifically developed for professional touring systems as a means to eliminate hum and buzz caused by ground loops when interfacing various equipment such as two consoles, remote towers and drive racks. Central to the Twin-Iso is the use of world-renowned Jensen audio transformers. These ensure the very best signal transfer without distortion caused by saturation or phase shift. All connections are balanced XLR following the AES standard with pin-1 ground and pin-2 hot. To add versatility, a polarity reverse switch is provided for each channel to ensure absolute phase is maintained throughout the audio signal path. As with all Radial products, the Radial Twin-Iso features a rugged 14-gauge steel construction for maximum durability and to stand up to the rigors of pro-touring. The unique book-end design provides a protective zone for the switches while the full bottom no-slip pad provides plenty of 'stay-put' for more active stages. A unique skeletal design features welded I-beam construction, making it impossible to torque the internal PC board, reducing the opportunity for cold solder joints to develop due to outside stress. This unique design also permits up to eight Twin-Isos to be rack-mounted using the Radial J-Rak in just two 19" rack spaces. The Radial Twin-Iso is a simple yet extremely effective tool for the professional audio engineer and system designer .
Attributes
Product Details
| ||||||||||||
Dimension
|
Properties
Twin ISO Specifications
Input impedance: 716 ohms
Insertion loss: 1.6dB (w/600 Ohm load)
Voltage gain: -1.6dB
Deviation from linear phase: +.03/-0° (20 Hz to 20 kHz, 0 dBu)
Frequency response: 10Hz to 80kHz
Distortion (THD): <0.001% (1kHz, +4 dBu)
<0.025% (20kHz, +4 dBu)
Maximum signal handling: +20.5dBu (20Hz, 1% THD)
Common mode rejection ratio (CMRR): 94dB (60Hz)
Output impedance: 116 ohms
Size (H x W x D): Size (H x W x D): 2" x 3.25" x 5"
Weight: 1.95 lbs / .9 kg
Construction: 14-gauge steel chassis & shell, baked enamel finish
Warranty: 3 years on device, 20yrs on Jensen transformers
Input impedance: 716 ohms
Insertion loss: 1.6dB (w/600 Ohm load)
Voltage gain: -1.6dB
Deviation from linear phase: +.03/-0° (20 Hz to 20 kHz, 0 dBu)
Frequency response: 10Hz to 80kHz
Distortion (THD): <0.001% (1kHz, +4 dBu)
<0.025% (20kHz, +4 dBu)
Maximum signal handling: +20.5dBu (20Hz, 1% THD)
Common mode rejection ratio (CMRR): 94dB (60Hz)
Output impedance: 116 ohms
Size (H x W x D): Size (H x W x D): 2" x 3.25" x 5"
Weight: 1.95 lbs / .9 kg
Construction: 14-gauge steel chassis & shell, baked enamel finish
Warranty: 3 years on device, 20yrs on Jensen transformers
Documents (1)
Brand
Report incorrect data about this product