Shure Beta 56A
Allround Instrument Microphone
EUR 169.00
MSRP: EUR 196.35
MSRP: EUR 196.35
Incl. VAT. Free delivery in Germany from EUR 200
Product # | 66645 |
Brand | Shure |
Category | Allround Instrument Microphones | Brand Category | Shure - Allround Instrument Mics |
Series | Shure Beta (Beta Mikrofone) |
Release date | October 2004 |
Availability | Will be ordered for you as quick as possible |
Shipping cost: EUR 29.90
Description
The compact Shure Beta 56A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical BETA 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
Beta 56A with integrated swivel-mount. Cable not included.
Beta 56A with integrated swivel-mount. Cable not included.
Attributes
Product Details
| ||||||||||||||
Dimension
|
Properties
Features:
- Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Legendary Shure quality and reliability
Specification:
Type
Dynamic (moving coil)
Frequency Response
50 to 16,000 Hz
NOTE: The curve below shows onaxis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
Output Level (at 1,000 Hz)
Open Circuit Voltage -51 dBV/Pa (2.8 mV)
(1 Pa = 94 dB SPL)
Impedance
Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector
Three-pin professional audio connector (male XLR type)
Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread
Net Weight
468 grams (16.7 oz)
- Weight: 0.640kg
- Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
- Compact design reduces stage clutter
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Minimally affected by varying load impedance
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Legendary Shure quality and reliability
Specification:
Type
Dynamic (moving coil)
Frequency Response
50 to 16,000 Hz
NOTE: The curve below shows onaxis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.
Polar Pattern
Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
Output Level (at 1,000 Hz)
Open Circuit Voltage -51 dBV/Pa (2.8 mV)
(1 Pa = 94 dB SPL)
Impedance
Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector
Three-pin professional audio connector (male XLR type)
Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread
Net Weight
468 grams (16.7 oz)
- Weight: 0.640kg
Documents (4)
Brand
Report incorrect data about this product
Recommended accessories
Shure A56D
EUR 63.40