Interpreting Systems

Digital distribution, 2 In / 16 Out

Four-channel output module to extend the SIS control

Control, 54 channels, NetRateBus, 19 "

- Discussion control unit for controlling up to 1,400 microphone units per system - fully digital audio and control - a control center for all of congress and interpreter components

Interpreter station

- Fully digital audio and control - 54 audio channels (one source and target up to 53 languages) - Up to 1,400 participants and interpreting Stations System

Präsidenten-/Delegiertensprechstelle

- Fully digital audio and control - Up to 1,400 microphone units per system (cascaded) - gooseneck microphone with illuminated ring, interchangeable, DIN connector

Service station

- Standard station with special software and Navigator - allows direct communication with interpreters, and President and technicians - Allows monitoring of all audio channels - sound and full digital control

MCW-Digital 50-3 / 50-9 Control

Control, 3 transmit / receive channels 3, 19 ", 2U

MCW-Digital 50-3 / 50-9 Control

Control, 9 transmit / receive channels 9, 19 ", 2U

Distribution system terminal

Control, 5 transmit / receive channels 4, 19 ", 2U

High noise immunity and privacy in data transmission through special modulation DSSS (Direct Sequence Spread Spectrum) is also in use with other wireless systems in the 2.4 GHz frequency band

Dolmetscherdoppelpult

In a soundproof room, the interpreter comes as the main workhorse of the simultaneous translation is used.

Interpreting Central, 4 channels

On Digital Signal Processing (DSP) based control unit and is secured with FlashROM modular expansion and managed as a basic version (SIS 121) in addition to the original channel up to four output channels.

Interpreting Central, 8 channels

The connection to the MCW-D 200 conference system is via 25-pin SUB-D cable in the TASCAM standard, which connect a microphone or mixer is about 3-pin XLR possible.

Interpreting Central, 12 channels

The connection to the MCW-D 200 conference system is via 25-pin SUB-D cable in the TASCAM standard, which connect a microphone or mixer is about 3-pin XLR possible.