db Technologies DVA-S10
Active Subwoofer
EUR 3201.90
Incl. VAT, free shipping in Germany
Product # | 122792 |
Brand | db Technologies |
Category | Active Subwoofers | Brand Category | db Technologies - Active |
Series | db Technologies DVA |
Release date | June 2007 |
Availability | Will be ordered for you as quick as possible |
Due to its size, this product requires more than 24 hours to prepare and ship.
*Parcels are delivered by Post or by a shipping company to the front door of your house or building, and not at the door of your apartment (if located on a higher floor).
*Parcels are delivered by Post or by a shipping company to the front door of your house or building, and not at the door of your apartment (if located on a higher floor).
Description
The bandpass subwoofer DVA S10 is equipped with a single 18" RCF-Neodymium woofer of the newest generation, driven by a 1000W digital power amp. Using the optionally available flyware, up to two DVA S10 can be flown mounted to the DRK-10 rigging kit. Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack.
The DVA S10 subwoofer is equipped with powerful RCF Precision woofers with neodymium magnets and a 4" voice coil for extremely high sound pressures. Double ventilation provides an optimum of cooling, a minimum of power compression at high reliability. The woofers are fibreglass reinforced and have a triple-roll coil embedded in a perfect edging with constant geometry. This combination makes an extreme peak-to-peak steering of up to 48mm possible.
The highly efficient digital power amps of both subwoofers do not need a fan cooling system. The integrated crossover ( 90/120Hz switchable), professional Power-Con mains connectors and a slot on the back of each subwoofer for the optional SDD delay-module are just a few highlights. Mounting points for the DRK-10 frame and threads on the back for taking the optional blue-wheels complete the picture.
DVA S10 cardioid bass setup with the SDD module
A cardioid setup comprising the SDD module and three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution
- which until today entailed much effort and audio gear - been so easy to achieve with such professional results.
The DVA S10 subwoofer is equipped with powerful RCF Precision woofers with neodymium magnets and a 4" voice coil for extremely high sound pressures. Double ventilation provides an optimum of cooling, a minimum of power compression at high reliability. The woofers are fibreglass reinforced and have a triple-roll coil embedded in a perfect edging with constant geometry. This combination makes an extreme peak-to-peak steering of up to 48mm possible.
The highly efficient digital power amps of both subwoofers do not need a fan cooling system. The integrated crossover ( 90/120Hz switchable), professional Power-Con mains connectors and a slot on the back of each subwoofer for the optional SDD delay-module are just a few highlights. Mounting points for the DRK-10 frame and threads on the back for taking the optional blue-wheels complete the picture.
DVA S10 cardioid bass setup with the SDD module
A cardioid setup comprising the SDD module and three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution
- which until today entailed much effort and audio gear - been so easy to achieve with such professional results.
Attributes
Product Dimensions
| ||||||||||||||
Product Details
| ||||||||||||||
Dimension
|
Properties
Technical data
Speaker Type Active Bandpass Subwoofer
Acoustical data
Frequency Response [+/- 3dB] 40 - 120 Hz
Max SPL 136 dB
Directivity Omnidirectional, Cardiod Option with SDD Module
LF 18 "
Type LF RCF Neodymium
Voice Coil LF 4 "
Amplifier
Amp Technology digipro
Amp Class Class D
LF Amp 1000 W
Cooling Convection
Processor
Controller Analog
Phase 0, 180 °
Limiter RMS, Peak, Thermal
Delay Option SDD Module
Crossover Frequency LF-MF 90, 120 Hz
Slope LF-MF 12 dB/Octave
Input Section
Signal Input 1x XLR fem, sym.
Input Sensitivity [dBu] -00 - -2 dBu
Signal Output 1x Link XLR, male, sym
1x X-Over Out, XLR male, sym.
Power Socket Powercon In/Out
Voltage Range 240 V
Mechanics
Housing Multiplex birch plywood
Housing Design Rectangular
Color Black, white
Surface Texture Textured acrylic lacquer
Handles 3x Side
Pole Mount 1x M20
Front Grille 1.5mm metall grille
Rigging Points Fly option with SRK 10
Castors Optional
Width 515 mm (20.6 in)
Height 640 mm (25.6 in)
Depth 720 mm (28.8 in)
Weight 46 kg (101.41 lbs)
- Weight: 46.000kg
- Height: 640mm
- Width: 515mm
- Depth: 720mm
Speaker Type Active Bandpass Subwoofer
Acoustical data
Frequency Response [+/- 3dB] 40 - 120 Hz
Max SPL 136 dB
Directivity Omnidirectional, Cardiod Option with SDD Module
LF 18 "
Type LF RCF Neodymium
Voice Coil LF 4 "
Amplifier
Amp Technology digipro
Amp Class Class D
LF Amp 1000 W
Cooling Convection
Processor
Controller Analog
Phase 0, 180 °
Limiter RMS, Peak, Thermal
Delay Option SDD Module
Crossover Frequency LF-MF 90, 120 Hz
Slope LF-MF 12 dB/Octave
Input Section
Signal Input 1x XLR fem, sym.
Input Sensitivity [dBu] -00 - -2 dBu
Signal Output 1x Link XLR, male, sym
1x X-Over Out, XLR male, sym.
Power Socket Powercon In/Out
Voltage Range 240 V
Mechanics
Housing Multiplex birch plywood
Housing Design Rectangular
Color Black, white
Surface Texture Textured acrylic lacquer
Handles 3x Side
Pole Mount 1x M20
Front Grille 1.5mm metall grille
Rigging Points Fly option with SRK 10
Castors Optional
Width 515 mm (20.6 in)
Height 640 mm (25.6 in)
Depth 720 mm (28.8 in)
Weight 46 kg (101.41 lbs)
- Weight: 46.000kg
- Height: 640mm
- Width: 515mm
- Depth: 720mm
Series Info
Since the 90's the Line-Array technology has changed soundreinforcement drastically. The vertical arrangement of speakers in an enclosure offers a high influence to soundspreading and reduces in comparison to ordinary soundsystems the loss of signal in relation to distance combined with a slim structure and broad sound distribution.
DVA makes this technology, which up to recently was only provided in high profile projects and installations, available for a broad range of budget orientated applications. All relevant criteria like weight, acoustic handling including purchase price and additional costs in form of transport and flying accessories have been well considered. Despite above mentioned features, the DVA is not limited in terms of curving and maximum amount of possible Array-Elements, like products of competitors in recent history in this segment. Specially the individual curving, optimised to the demands of the event, enables the acoustic advantages and shows the flexibility of DVA.
dBTechnologies designed a Line Array which sets new standards in handling, flexibility and profitability by using most modern technology and materials, with a vast amount of knowledge and experience in building active loudspeaker systems. The DVA T4 Line-Array element has a sensational weight of only 13,2kg. The obvious advantage for handling and transport also makes flying possible where under normal circumstances the trussing is not strong enough to support also flying of the audio devices - an Array of six T4 Tops therefore weighs less than 120 kg.
DVA makes this technology, which up to recently was only provided in high profile projects and installations, available for a broad range of budget orientated applications. All relevant criteria like weight, acoustic handling including purchase price and additional costs in form of transport and flying accessories have been well considered. Despite above mentioned features, the DVA is not limited in terms of curving and maximum amount of possible Array-Elements, like products of competitors in recent history in this segment. Specially the individual curving, optimised to the demands of the event, enables the acoustic advantages and shows the flexibility of DVA.
dBTechnologies designed a Line Array which sets new standards in handling, flexibility and profitability by using most modern technology and materials, with a vast amount of knowledge and experience in building active loudspeaker systems. The DVA T4 Line-Array element has a sensational weight of only 13,2kg. The obvious advantage for handling and transport also makes flying possible where under normal circumstances the trussing is not strong enough to support also flying of the audio devices - an Array of six T4 Tops therefore weighs less than 120 kg.
Documents (3)
Report incorrect data about this product
Recommended accessories
db Technologies TC-10S
EUR 68.95