Es ist schon eine wahre Freude bei Music zu shoppen: Service, Beratung, Diskretion und Freundlichkeit sind bei euch am oberster Stelle.
Audio-Technica AT4050ST
Mikrofon stereo
CHF 1218.00
UVP: CHF 1539.00
UVP: CHF 1539.00
Gratis Lieferung innerhalb der Schweiz
Artikelnr. | 142675 |
Marke | Audio-Technica |
Kategorie | Mikrofon stereo | Marken-Kategorie | Audio-Technica - Stereomikrofon |
Markteinführung | Dezember 2014 |
Verfügbarkeit | Wird schnellstmöglich für Sie bestelltBenachrichtigen sie mich |
Beschreibung
Das AT4050ST ist ein Stereo-Kondensatormikrofon mit einer Nieren und einer Achterkapsel,
das wahlweise ein Stereo- oder ein MS Signal liefert. Dank der präzisen Richtcharakteristik
über nahezu das ganze Frequenzspektrum bietet das AT4050ST ein adäquates Stereobild.
Durch das übertragerlose Vorverstärkerdesign werden auch tiefe Frequenzen noch unverfälscht
wiedergegeben.
das wahlweise ein Stereo- oder ein MS Signal liefert. Dank der präzisen Richtcharakteristik
über nahezu das ganze Frequenzspektrum bietet das AT4050ST ein adäquates Stereobild.
Durch das übertragerlose Vorverstärkerdesign werden auch tiefe Frequenzen noch unverfälscht
wiedergegeben.
Attribute
Produktdetails
| ||||||||||||
Abmessungen
|
Eigenschaften
- Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
- Independent cardioid and figure-of-eight condenser elements
- Switch selection of Mid-Side mode and two internally matrixed stereo modes
- Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Integral 80 Hz high-pass filter switch and 10 dB pad switch
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Certified by the METAlliance (Music Engineering and Technology Alliance)
- Polar Pattern: Cardioid and Figure-of-eight
- Frequency Response: 20-18,000 Hz
- Low Frequency Roll-off: 80 Hz, 12 dB/octave
- Maximum Input Sound Level: Mid and Side: 149
dB SPL;159 dB SPL, with 10 dB pad (nominal)
- Phantom Power Requirements: 48V DC
- Switches: 90°, 127°, M-S; Flat, roll-off; 10
dB pad (nominal)
- Weight: 517 g
- Dimensions: 193.0 mm long, 53.4 mm maximum
body diameter
- Output Connector: Integral 5-pin XLRM-type
- Cable: 5.0 m long, 8-conductor, shielded,
vinyl-jacketed stereo cable with 5-pin XLRF-type
connector at microphone end and two 3-pin
XLRM-type connectors at output end
- Gewicht: 1.940kg
- Independent cardioid and figure-of-eight condenser elements
- Switch selection of Mid-Side mode and two internally matrixed stereo modes
- Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Integral 80 Hz high-pass filter switch and 10 dB pad switch
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
- Certified by the METAlliance (Music Engineering and Technology Alliance)
- Polar Pattern: Cardioid and Figure-of-eight
- Frequency Response: 20-18,000 Hz
- Low Frequency Roll-off: 80 Hz, 12 dB/octave
- Maximum Input Sound Level: Mid and Side: 149
dB SPL;159 dB SPL, with 10 dB pad (nominal)
- Phantom Power Requirements: 48V DC
- Switches: 90°, 127°, M-S; Flat, roll-off; 10
dB pad (nominal)
- Weight: 517 g
- Dimensions: 193.0 mm long, 53.4 mm maximum
body diameter
- Output Connector: Integral 5-pin XLRM-type
- Cable: 5.0 m long, 8-conductor, shielded,
vinyl-jacketed stereo cable with 5-pin XLRF-type
connector at microphone end and two 3-pin
XLRM-type connectors at output end
- Gewicht: 1.940kg
Dokumente (1)
Melden Sie uns einen Fehler in den Produkt-Informationen