Combo

Preamp based on the classic 1959SLP

20 watts with power reduction to 5 watts

- Power : 20 W

- External speaker output : Yes

- Outputs : DI jack, H.P. jack 8 Ω, H.P. jack 16 Ω

Speaker configuration: 2x12"

Unit Impedance: 8 Ohms

Speaker model: Celestion Seventy-80 (80w, 16 Ohms)

Brown Body Gold Cap Push-On Knob-90062

Replacement fuse for Marshall JCM 2000 TSL-60 20mm - 0.5 Ampere

Marshall Poti B10K log PC, 11mm, for Marshall Valvestate II, AVT and JCM2000 series

- Power : 20 W

- External speaker output : Yes

- Outputs : DI jack, H.P. jack 8 Ω, H.P. jack 16 Ω

Speaker configuration: 2x12"

Unit Impedance: 8 Ohms

Speaker model: Celestion Seventy-80 (80w, 16 Ohms)

Including 5m connection cable (not shielded!)

Connection to the amp with a simple jack cable (even without shielding)

Intelligent, stage-friendly LED display for calling up the stored sounds

Inputs: 1

Speaker configuration: 4x12"

Speaker model: Celestion G12E-60 (60w, 16Ω)

Preamp based on the classic JCM800 2203

20 watts with power reduction to 5 watts

1x10" Celestion V-Type 10”

1 x 12" Cabinet in limited Navy Levant Finish/NAMM20 Special

70 watts

1 x 12" Celestion V Type

Speaker configuration: 4 x 12"

Speaker model: Celestion G12E-60 (60w, 16 Ohms)

Power handling: 240W

70 Watt

1 x 12" Celestion V-Type

16ohm Mono

Programmable 6-way footswitch.

Five decades of fine tuning.

120 Watt, 4 x 12? angled cab, loaded with custom speakers.

Loaded with just two Celestion G12 Vintage speakers, the 2536 makes great sense if you want the classic Marshall sound and look, but have restricted space - whether that's on stage or in your project studio.

AS50R/AS80R Acoustic Combo Black Cover Gold Logo.

Castor and socket for the Marshall 1960A 300W 4x12" angled cabinet.

Double foot switch PEDL90010

This double foot switch is included in the delivery of the large MG models (from MG50FX) and is used to switch channels for the four programmed channels: Clean, Crunch, Overdrive 1 and Overdrive 2.

Material: Plastic

Back corner screw distance: 43.5x35.5mm

Set of 4 front corners for Marshall amplifier ​.

Box corner, front, for straight box at the top, for slanted box at the bottom

- 4x 12" Vintage Cabinet Hardware

- 120 Watt, 16 Ohm

- Extrabox for 1959HW

Original Black/Cream (Salt n Pepper) Weave grill cloth for Marshall amps.

Roll width is 82cm, sold by meter.