Audio-Technica U851RWb / Condenser Boundary Microphone (white)
Boundary Microphone
CHF 319.00
Will be ordered for you as quick as possible
Free delivery in Switzerland
| Product # | 238037 |
| Brand | |
| Category | |
| Brand Category |
Variants
Cardioid condenser boundary microphone (white version of U851R)
The phantom-powered U851R condenser boundary microphone offers outstanding speech intelligibility and transparent sound quality for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing, and other demanding sound pickup situations.
The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter, and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements – omnidirectional (360°), cardioid (120°), and hypercardioid (100°) – available separately. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.
Threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security.
- - Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- - Superior off-axis rejection for maximum gain before feedback
- - PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- - Small-diameter UniPoint® element near boundary eliminates phase distortion and delivers clear, high-output performance
- - Available interchangeable elements permit angle of acceptance from 100° to 360°
- - UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- - Self-contained electronics eliminate need for external power module
- - Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- - Low-profile design with low-reflectance finish for minimum visibility
- - Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security
- Microphone element: Fixed-charge back plate, permanently polarized condenser
- Frequency range: 20-20,000 Hz
- Subsonic filter: 80 Hz, 18 dB/octave
- Open circuit sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Max. input level: 134 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 108 dB, 1 kHz at Max SPL
- Signal-to-noise ratio: 68 dB, 1 kHz at 1 Pa, A-weighted
- Phantom power: 11-52V DC, 4.4mA
- Switch: flat, roll off
- Weight: 253g (8.9oz)
- Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
- Dimensions: 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
- Microphone output connector: TB3M-type
- Cable: 3-pin XLRM type
- Optional Interchangeable Elements: UE-C cardioid (120°), UE-H hypercardioid (100°), UE-O omnidirectional (360°)
- Included accessories: Soft protective pouch
- Frequency range: 20-20,000 Hz
- Subsonic filter: 80 Hz, 18 dB/octave
- Open circuit sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Max. input level: 134 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 108 dB, 1 kHz at Max SPL
- Signal-to-noise ratio: 68 dB, 1 kHz at 1 Pa, A-weighted
- Phantom power: 11-52V DC, 4.4mA
- Switch: flat, roll off
- Weight: 253g (8.9oz)
- Cable: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
- Dimensions: 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
- Microphone output connector: TB3M-type
- Cable: 3-pin XLRM type
- Optional Interchangeable Elements: UE-C cardioid (120°), UE-H hypercardioid (100°), UE-O omnidirectional (360°)
- Included accessories: Soft protective pouch
| Product Details | |
|---|---|
| Product Number | 238037 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Boundary Microphone | |
| Date | April 2022 |
Related Products