Product # | 246695 |
Brand | Boss |
Series | Boss Compact Pedal |
Category | Amp Simulator Pedal |
Brand Category | Boss - Amp Simulator Pedals |
Recommended accessories

Pro Guitar Sounds to Go
The IR-2 packs the inspiring sounds of classic tube amps and mic’d speaker cabinets in a standard stompbox footprint, giving you easy access to studio-grade tones on quiet stages, fly dates, recording gigs, and practice sessions. Backed by decades of BOSS tone expertise, every selection delivers the same expressive nuance and dynamic touch response of a real amp and cabinet. Audio quality is also top-notch, thanks to advanced DSP, 32-bit floating point processing, and a 96 kHz sampling rate.

Inspiring Tones for Every Style
Eleven solid platforms dish up every guitar amp flavor, from famous tube combos to vintage and modern stacks. There are also several original BOSS amps, including a high-gain Brown type derived from the Katana series. The amps are all paired with curated Celestion Digital IRs for dialing up polished sounds right away. If you prefer to use cab IRs from your own collection, you can load them into the pedal via USB-C and a dedicated app.

Immediate Sound Creation
With the IR-2’s intuitive interface, you’ll be ready to play in seconds. Simply select an amp type and tweak the sound with familiar amp-style controls. Then twist the Ambience knob to add some natural spaciousness and depth if desired. You can plug your other pedals into the IR-2’s input, just like you would with an amp. If you want to go further, use the send/return loop to patch mod, delay, and reverb effects into the chain after the amp sounds. The TRS return jack supports stereo operation, letting you pass stereo effects to the IR-2’s audio outputs.

Play and Record Anywhere
Adding the IR-2 to your pedalboard greatly expands its versatility, giving you a complete guitar sound solution everywhere you play.
- Dry battery (9V, 6LR61)
- - Premium amp emulator and cabinet IR loader in a BOSS compact pedal
- - Exceptional audio quality with 32-bit floating-point processing and 96 kHz sampling rate
- - Eleven different amp types and high-quality cab IRs from Celestion Digital
- - Simple user interface with Level, Gain, Bass, Middle, and Treble controls
- - Ambience effect with dedicated control
- - Mono input and stereo outputs
- - Mono/stereo loop for patching in mod, delay, and reverb effects after the amp emulation
- - Headphones jack for practice
- - USB-C for recording and audio playback via a computer or iOS device*
- - Switch between two amp/cab tones with the pedal switch or an external footswitch
- - Dedicated IR-2 IR Loader app (macOS/Windows) for loading your own cabinet IRs
- - Amp and cabinet sections can be turned on/off independently for isolated use
- - BOSS five-year warranty
- AD Conversion: 24 bits + AF method (AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters)
- DA Conversion: 32 bits
- Processing: 32-bit floating point
- IR cabinet data format: Mono, Maximum 500 ms, 44.1/48/96 kHz, 16 bits linear/24 bits linear/32-bit floating point
- Preset IR cabinet: 11
- User IR cabinet slot: 11* These are the same slots as the preset IR cabinet.
- Nominal Input Level: INPUT, RETURN: -20 dBu
- Maximum Input Level: INPUT, RETURN: +7 dBu
- Input Impedance: INPUT, RETURN: 1 MΩ
- Nominal Output Level: OUTPUT A (MONO), OUTPUT B, SEND, PHONES: -20 dBu
- Maximum Output Level: OUTPUT A (MONO), OUTPUT B, SEND, PHONES: +7 dBu
Output Impedance: OUTPUT A (MONO), OUTPUT B, SEND: 1 kΩ
- PHONES: 44 Ω
Recommended Load Impedance: OUTPUT A (MONO), OUTPUT B, SEND: 10 kΩ or greater
- PHONES: 44 Ω or greater
- Bypass: Buffered bypass
Controls:
- Type knob
- GAIN knob
- TREBLE knob
- LEVEL knob
- MIDDLE knob
- AMBIENCE knob
- BASS knob
- Pedal switch
- Indicator: CHECK indicator (Used for indication of Channel and check battery)
Connectors:
- INPUT jack
- OUTPUT A (MONO) jack
- OUTPUT B jack
- SEND jack: 1/4-inch phone type
- RETURN jack: 1/4-inch TRS phone type
- CH SEL jack: 1/4-inch phone type
- DC IN jack
- PHONES jack: Stereo miniature phone type
- USB port: USB Type-C(R)
- Power Supply: Alkaline battery (9 V, 6LR61 or 6LF22, commercially available) or AC adaptor (PSA series: sold separately)
- Current Draw: 160 mA
- Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.) Alkaline: Approx. 3.5 hours (6LR61)
Dimensions: 73 (W) x 129 (D) x 59 (H) mm / 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
- Weight: 0.45kg (1lb)
Recommended Accessories:
- AC Adaptor: PSA Series
- Parallel DC Cord: PCS-20A
- Footswitch: FS-5U
- Dual Footswitch: FS-6 / FS-7
- Instrument Cables: BIC-Series
- Pedalboard Patch Cables: BCK Series
- Pedalboard: BCB Series
Key attributes | |
---|---|
Effect Types | Amp & Cab Simulator |
Battery Operated | Yes |
True Bypass | No |
Product Dimensions | |
---|---|
Depth | 65mm |
Width | 92mm |
Height | 150mm |
General Information | |
---|---|
Manufacturer information | Roland Corporation
5100 S. Eastern Ave, Los Angeles 90040-2938 Los Angeles United States |
Product Warranty | |
---|---|
Years | 5 |
Details | Gültig nachdem Garantieschein eingeschickt wurde. |
Amp Simulator Pedal attributes | |
---|---|
PSU Included | No |
Mini Form | No |
Input Configuration | Mono |
Output Configuration | Mono |
Voltage | 9V |
Analog/Digital | Digital |
Product Details | |
---|---|
Product Number | 246695 |
Brand | |
Series | |
Category | |
Brand Category | |
Relevancy rank in Category Amp Simulator Pedal | |
Date | December 2023 |
Dimension | |
---|---|
Weight | 0.46kg |
Box Depth | 170mm |
Box Width | 92mm |
Box Height | 85mm |
Gross Weight | 0.62kg |
Reviews
View different language product reviews (3)