- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method / AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
- DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: SDE-3000 STEREO DELAY x2 / FOOT VOLUME
- Memories: 100
- Nominal Input Level: INPUT (L/MONO, R): -10 dBu
- Maximum Input Level: INPUT (L/MONO, R): +12 dBu
- Input Impedance: INPUT (L/MONO, R): 1 M ohm
- Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu
- Output Impedance: OUTPUT (L/MONO, R): 1 k ohm
- Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater
- Controls: TIME button, FEEDBACK button, OUT button, RATE button, DEPTH button, 1--4 buttons, BANK A button, BANK B button, LEFT button, RIGHT button, FILTER button, TIME×2 button, DELAY PHASE button, MOD button, FEEDBACK PHASE button, DIGITAL DELAY1 button, DIGITAL DELAY2 button, SETUP button, DDL1 switch, DDL2 switch, TAP/CTL1 switch
- Display: 7 segments, 12 digits LED
Connectors:
- INPUT (L/MONO, R) jack
- OUTPUT (L/MONO, R) jacks: 1/4-inch phone type
- CTL2,3/EXP1 jack
- CTL4,5/EXP2/GA-FC jack: 1/4-inch TRS phone type
- MIDI (IN, OUT) jacks: Stereo miniature phone type
- USB port: USB Type-C(R)
- DC IN jack
- Power Supply: AC adaptor
- Current Draw: 450 mA
Accessories:
- AC adaptor (PSB-1U + AC Cord Set)
- STARTUP GUIDE
- Leaflet "USING THE UNIT SAFELY"
- Rubber foot x 4
Options (sold separately):
- Footswitch: FS-5U, FS-5L
- Dual footswitch: FS-6, FS-7
- Expression Pedal: Roland EV-5, EV-30, FV-500L, FV-500H
- Foot Controller :GA-FC, GA-FC EX
- MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535
- Width: 199 mm / 7-7/8 inches
- Depth: 135 mm / 5-3/8 inches
- Height (including rubber foot): 54 mm / 2-1/8 inches
- Weight: 1.1 kg / 2 lb 7 oz