Skip to main contentSkip to navigationSkip to search

Sequential Prophet REV2 (16 voice)

Sequential
(3)
CHF 2579.00
CHF 2834.65
1 unit in stock
Ships immediately from our stock (CH)
Free delivery (CH)
A Modern Classic Reinvented

Like its predecessor, the prophet-08, the REV2 features two DCOs per voice, and Curtis filters at the heart of its sound engine, but boasts a number of significant enhancements designed to make it more powerful. The most obvious difference between the REV2 and its predecessor is polyphony. The REV2 has 16-voices as its standard configuration - twice the polyphony of the Prophet '08 (though an 8-voice option is also available). Since the synth features bi-timbral operation, two completely independent sounds can be stacked or split - layered together or assigned to two different zones on the keyboard. The essence of its sound comes from two DCOs (plus a sub-octave generator on oscillator 1) per voice, with 4 waveshapes (sawtooth, triangle, sawtooth + triangle, and pulse) and a 2/4 pole low-pass, resonant Curtis filter per voice. These are the same filters used not only in the Prophet '08, but also in many classic instruments of the '70s and '80s. A new feature unique to the REV2 is waveshape modulation. You can vary the "pulse width" of any of the four waveforms by manually dialing in a desired waveshape width or by using an LFO or other modulation source for continuously shifting timbre. An effects section provides reverb, delays (standard and BBD), chorus, phase shifter, ring modulation, and distortion. In stacked or split voice mode, you can apply a different effect to each layer. Effects parameters can be modulated through the mod matrix, which is twice as extensive as its predecessor, with 8 individual slots and many more sources/destinations. A new polyphonic step sequencer allows up to 64 steps and up to 6 notes per step. A different sequence can be created for each layer when working in stacked or split voice mode. A separate gated sequencer functions as a modulation source, allowing you to create up to 4 different 16-step sequences for complex modulation. Sequences allow ties and rests, and can sync to an external MIDI clock. The arpeggiator features note repeats, re-latching, and can be synced to external MIDI clock, as well. Other improvements include a premium-quality, five-octave, semi-weighted keyboard with velocity and channel aftertouch, an integrated power supply, USB support, and a crisp OLED display.

  • - OSCILLATORS
  • 2 digitally controlled analog oscillators (DCOs) per voice (plus sub octave on oscillator 1) with selectable sawtooth, triangle, saw/triangle mix, and pulse waves (with pulse-width modulation)
  • - Glide (portamento): separate rates per oscillator
  • - White noise generator
  • - Analog VCAs
  • - Hard sync
  • - FILTERS
  • - 1 analog Curtis low-pass filter per voice, selectable 2- and 4-pole operation (self-resonating in 4-pole mode)
  • - ENVELOPES
  • - 3 envelope generators: filter, VCA, and assignable (four-stage ADSR + delay); Envelope 3 can loop.
  • - SEQUENCER
  • - Polyphonic step sequencer with up to 64 steps (6 notes per step), and ties and rests. Separate 16 x 4 gated step sequencer. Each layer can have a separate sequence.
  • - LFOS
  • - 4 LFO's with key sync per LFO
  • - MODULATION
  • - 8-slot modulation matrix
  • - ARPEGGIATOR
  • Programmable arpeggiator with up, down, up+down, random, assign modes
  • - Selectable note value: 16th note, 8th note triplet, 8th note, dotted 8th note, quarter note
  • - One, two, or three octave range
  • - Re-latching arpeggiation
  • - Note repeat
  • - CONTROLS
  • 5-octave keyboard with semi-weighted action, velocity, and aftertouch
  • - 52 knobs and 20 buttons enable deep and comprehensive editing with little to no menu diving.
  • - Spring-loaded pitch wheel and assignable mod wheel
  • - MEMORY
  • - 512 Factory Programs (4 banks of 128) and 512 fully editable User Programs with 2 layers (2 separate sounds) in each Program
  • - IN/OUT
  • MIDI In, Out, Thru
  • - Main stereo audio output: 1/4? unbalanced
  • - Output B stereo audio output: 1/4? unbalanced
  • - Sustain pedal input: accepts normally on or normally off momentary footswitch.
  • - Pedal/CV input: responds to expression pedals or control voltages ranging from 0 to 5 VDC (protected against higher or negative voltages).
  • - Headphone output: 1/4? stereo phone jack.
  • - POWER
  • IEC AC power inlet for internal power supply
  • - Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz
  • - Power consumption: 22 watts maximum (17 watts for 8-voice configuration; 22 watts for 16-voice configuration)
  • - PHYSICAL SPECS
  • - Oiled African mahogany wood end panels

Key attributes
Number of Keys
61
Colour
Black
Keyboard Type
Semi-weighted Keys
Speakers
No
Model
Synthesizer
Product Dimensions
Depth
322mm
Width
892mm
Height
965mm
Synthesizer attributes
Battery Operated
No
Pedal
Not Included
MIDI Interface
USB to Host
Stand
Not Included
Built-in Tones
Yes
Cover
No
Display
Yes
Product Details
Product Number
192688
Brand
Sequential
Category
Synthesizer
Brand Category
Sequential - Synthesizers
Relevancy rank in Category Synthesizer
46 of 182
Date
June 2017
Dimension
Weight
9.3kg
Box Width
892mm
Gross Weight
12kg
Reviews
5
(3)

View different language product reviews (2)

Parfait si on aime les sons Boards of Canada Radiohead. Bon service de livraison par MusiX pour les produits fragiles !

Operation
Features
Sound