Laney DBF200
| Product # | 252470 |
| Brand | Laney |
| Series | Laney Digbeth (DB) |
| Category | Bass Combo Amplifier |
| Brand Category | Laney - Combos |
DUAL CHANNELS
The DBF200 features 2 channels a clean FET channel and a fully loaded OVERDRIVE channel with separate DRIVE & VOLUME allowing you to dial in the exact amount of tube style overdrive you are looking for.
MIX
The DBF200 features a MIX setting on the channel selection that allows you to get the benefits of the clear precise bass tone of the FET channel and the warmth and articulation of the DRIVE channel giving you the best of both worlds!
PRESHAPE
The DBF200 features a switchable preshape. Switching in the preshape applies an EQ curve set to scoop the mids, push the bottom and make the top end jump out. Great for playing slap or rock bass.
3 BAND EQ
The amp boasts a powerful 3-band EQ with switchable mid voicing. Letting you dial in the exact bass tone you are after.
TILT
Tilt is a dynamic, powerful SEE-SAW EQ control. This control has a central neutral position. Turning the control clockwise increases the overall mid to high frequencies and decreases the lows thereby giving your sound more presence, which can be useful for cutting through live band situations. Turning the control anti clockwise reduces the overall mid to high frequencies and increases the lows making your overall sound rounder.
AUX IN & HEADPHONES
A 3.5mm jack for connecting an external sound source. Useful for jamming along with audio tracks. Plus, a 3.5mm jack for monitoring or silent practice.
MASTER VOLUME
The DBF200 features a MASTER VOLUME control that allows you to dial in the final volume level, after the preamp drive and volume controls have been set. Increasing the master volumes does not inherently change the tone of the amplifier.
DI-OUT
The DBF200 features a balanced XLR DI out for connecting to a PA or recording applications. The DI-OUT is sourced from the front stage of the amplifier. Before the FET/DRIVE channels and any EQ. If you are looking for a post FET/DRIVE and EQ output, then you can use the FX SEND/LINE out.
CONNECTIVITY
The DBF200 is equipped with an FX Loop. These sockets are used for connecting external effects device to your amplifier. Connect the send jack to the input of your external device and the return socket to the output. The DBF200 also features a footswitch socket for connecting a footswitch to enable/disable the drive channel remotely.
HH PROFESSIONAL WOOFER
The DBF200 is equipped with a 15" HH AUDIO Blue professional woofer which delivers punchy bass tones with clarity. All Digbeth FOUNDRY combos features a removable front fret which makes them great options as recording amps.
- - High-powered performance – 200W RMS for serious stage use
- - Deep, rich low-end – 15" HH Blue woofer delivers powerful bass response
- - Dual channel design – FET & Tube blend for total tonal control
- - Quiet operation – fanless Class D amp with passive cooling
- - Vintage look, modern soul – classic styling meets innovative features
- - Versatile connectivity – DI out, FX loop, aux-in, headphone out
- - Extensive EQ section – shape your sound with precision
- - Tour-ready build – tough MDF cabinet, steel-reinforced handle
- - Global-ready power supply – universal voltage input
- - Part of the Laney Digbeth Foundry Series – heritage, innovation, and value combined
- Speaker: 1 x 15" HH Blue professionnel woofer
- Frequency response (-10): 41 Hz > 18 kHz
- Max SPL (1M): 122 dB SPL (Continuous), 125 dB SPL (Peak)
- Amplifier type: Class D, with fully passive convection cooling for silent operation
- Channel: Two, Fet and Tube with mix options. Footswitchable with optional FS1-Mini footswitch
- Input: 6,3 mm(1/4") jack instrument, 3.5 mm Stereo aux in, 6,3 mm jack socket FX return
- Input impedance: 1MΩ
- Ouptut: 3.5 mm (1/8") stereo headphones jack, 6,3 mm jack socket FX send, balanced male XLR D.I output (pre EQ)
- Controls: FET Volume, preshape switch, drive switch FET, Drive and channel mix options, drive, Drive volume, bass, middle, middle voicing switch, treble, tilt control, master volume
- EQ: Preshape, bass +/- 12dB, middle with four switchable voicing options +/- 12dB, treble +/- 12dB, tilt control
- Indicator: Power LED
- Enclosure: MDF 15mm cabinet
- Handle: Top mounted steel reinforced strap handle
- Finish: hard wearing black vinyl, steel corners
- Power supply: Internal universal 100-240 V - 50/60Hz, switched mode power supply
- Power consumption: Typical power consumption 150W nominal, max power consumption 360 Watts
| Product Dimensions | |
|---|---|
| Depth | 466mm |
| Width | 555mm |
| Height | 351mm |
| Product Details | |
|---|---|
| Product Number | 252470 |
| Brand | |
| Series | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Bass Combo Amplifier | |
| Date | August 2025 |
| Product Quantity | |
|---|---|
| Unit | 1 piece(s) |
| Dimension | |
|---|---|
| Weight | 16.6kg |
| Box Depth | 530mm |
| Box Width | 555mm |
| Box Height | 415mm |
| Gross Weight | 18.6kg |
I bought the Laney for practicing at home, and it sounds fantastic! With its adjustable controls and built-in distortion, as well as aux input and headphone output, it has everything a musician could want. And it's all at a fair price.