- Two authentic CEM 3340 VCOs per voice with simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse.
- Pulse width per oscillator
- Hard sync: oscillator 1 syncs to oscillator 2
- Oscillator 1, 2 and White Noise amount
- Four-pole, resonant, low-pass filter per voice, switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter (Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2. Rev3 filter is a Doug Curtis-designed CEM 3320)
- Filter can be driven into self-oscillation with the Resonance control
- Filter keyboard tracking: off, half, full
- Four-stage (ADSR) envelope generators, one for Filter and one for Amp
- The LFO features three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously
- Poly Mod sources, filter envelope and oscillator B, can be set to modulate oscillator A frequency, oscillator A pulse width, or filter cutoff
- Channel (mono) aftertouch destinations: filter cutoff frequency, LFO amount
- Bi-timbral operation, Layer mode: two different 5-voice programs stacked together simultaneously, and Split mode: two independent, user-assignable performance zones, with a different 5-voice program assigned to each.
- Full-sized, semi-weighted, premium Fatar 5-octave keyboard with velocity and aftertouch
- Mod wheel
- Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down)
- Polyphonic glide (portamento)
- Unison (monophonic) mode with configurable voice count, from one to all ten voices and key modes
- Roadworthy all-steel construction with exotic lacewood body and trim
- Enhancements
- Vintage Knob recreates the characteristics of various Prophet-5 models by varying the behavior of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s.
- Oscillator 2 can be set to Low frequency mode and have Keyboard tracking turned on or off
- Velocity modulation of envelope amount for more dynamic Filter and Amp control
- The LFO has both Initial amount and mod wheel control, and its destinations include oscillator A frequency, oscillator B frequency, oscillator A and B pulse width, filter cutoff
- Preset switch: when off, the front panel is live; what you see is what you hear
- 200 user and 200 factory programs in 5 banks of 40 programs each
- Direct program access, including Prophet 5-style single-button access to the current set of 8 programs
- Ins & Outs
- Mono output (1 x 1/4” phone jack)
- Headphone output (stereo, 1/4” phone jack)
- MIDI in, out, and thru ports
- USB for bidirectional MIDI communication
- Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation.
- Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-10. Outputs a 15-volt on/off used to gate the envelopes of an external synth.
- Low-pass filter cutoff expression pedal input
- Volume expression pedal input
- Sustain footswitch input
- IEC AC power inlet for internal power supply, operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; 28 watts maximum power consumption