Yamaha DHR12M
| Product # | 253632 |
| Brand | Yamaha |
| Series | Yamaha DHR |
| Category | 12" Active Loudspeaker |
| Brand Category | Yamaha - 12" Active Loudspeakers |
Recommended accessories
Cabinet designs optimized for a range of audio environments
The DHR Series features a comprehensive lineup of powered loudspeakers with cabinets optimized to meet the demands of specific applications. DHR12M and DHR15M feature a coaxial compression driver for improved clarity and smoother frequency response for floor monitoring.
Ultra-Precise DSP Processing for High-Definition Sound
All full range models feature Yamaha's proprietary FIR-X tuning™ utilizing linear phase FIR* filters for the crossover network. FIR-X tuning™ simultaneously optimizes frequency and phase response while adjusting the time alignment between the HF and LF transducers. This creates a very smooth response around the crossover point, providing much better clarity and imaging than what is possible with typical crossovers.
Extensive DSP Protection Functions for Maximum Output
In a typical system comprising passive loudspeakers, power amps and signal processors, trying to set optimal parameters for each component can be a daunting task. One of the advantages of active loudspeakers is that the combination of transducers and amps can be perfectly optimized. During the development of the DZR, DXR mkII, DHR, DBR and DXS series, we measured and tested the durability of each transducer and the overall amp output through countless indoor and outdoor listening tests. Based on the test results, we were able to set the optimal limiter point for each model using precise DSP control. In addition to the optimal limiting, our speakers employ many of the same protection functions used in our top-class PC-D Series professional power amplifiers. A microprocessor and high-power DSP monitor the status of the power supply, power amplifiers, transducers and ongoing signals to protect all aspects of each component. As a result, these speakers can perform to their full potential while ensuring reliable operation in even the most severe conditions.
Easy-to-use Onboard 2-Channel Mixer
DHR Series speakers have two input channels. CH1 has a combo jack which accepts both XLR and TRS Phone allowing for either Mic or Line level input signals. CH2 offers two input options; a combo jack that accepts XLR or TRS Phone, and a pair of RCA pin Jacks for input from CD players or other stereo line-level sources. The onboard mixer allows you to select either CH1+2 MIX to mix the signal of CH1 and CH2, or CH1 THRU to pass the signal from CH1 only.
High-Efficiency 1000W Class-D Amplifiers
The DHR’s lightweight, high performance Class-D amplifier is capable of producing up to 1000W* of power, achieving an SPL of 131 dB (DHR15), delivered with remarkable clarity and dynamic characteristics. *DHR10 has an output level of 700W.
- - The coaxial driver delivers precise, smooth phase and frequency response characteristics ideal for use in monitoring applications
- - Featuring a plywood cabinet that delivers a clear sound with minimal vibration
- - Compact, low profile, plywood enclosure with a polyurea coating for a robust, scratch-resistant surface
- - A pole socket for use on a stand
- - Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion
- Frequency range (-10dB): 55 Hz - 20 kHz
- Coverage area: H90ﾟ x V90ﾟ
- Crossover: 1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
- Maximum Output Level: 129 dB SPL
- LF Components: Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite
- HF Components: Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite
- Amplifier: Class D
- Dynamic Power Rating: 1,000 W (LF: 800 W, HF: 200 W) *1
- Continuous Power Rating: 465 W (LF: 400 W, HF: 65 W)
- Cooling: Fan cooling, 4 speeds
- Power Consumption: 74 W (1/8power), 18 W (Idle)
- Power Requierments: 100 V, 100-120 V, 220-240 V, 110/127/220V (Brazil), 50/60 Hz
- A/D D/A Converters: 24 bit 48 kHz Sampling
- Processors: HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
- I/O Connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Cabinet Material: Plywood
- Finish: Durable Polyurea Painting, Black
- Handle: Side x 1
- Pole Socket: Φ35 mm x1 (Side)
- Rigging: No
- Floor Monitor Angle: 57°
| Product Dimensions | |
|---|---|
| Depth | 454mm |
| Width | 500mm |
| Height | 343mm |
| General Information | |
|---|---|
| Manufacturer information | Yamaha Music Central Europe GmbH
Siemensstraße 22-34 25462 Rellingen Germany |
| 12" Active Loudspeaker attributes | |
|---|---|
| Unit | 1 piece(s) |
| Product Details | |
|---|---|
| Product Number | 253632 |
| Brand | Yamaha sells their products throughout Europe from its European central warehouse. Products that we do not have in stock, but are available from stock at Yamaha Europe, are usually very reliably available within one week. If a product in the European warehouse is not available from stock, long delivery times are also possible. If in doubt, please ask us.
|
| Series | |
| Category | |
| Brand Category | |
| Relevancy rank in Category 12" Active Loudspeaker | |
| Date | July 2025 |
| Dimension | |
|---|---|
| Weight | 16.5kg |
| Box Depth | 569mm |
| Box Width | 500mm |
| Box Height | 562mm |
| Gross Weight | 25kg |