FBT HIMaxX 40

- Design Bass-reflex passivo de 2 vias
- Woofer de neodímio de 320 mm (12") com design personalizado B&C e bobina de voz de 75 mm (3")
Driver de compressão B&C de 25 mm (1") com bobina de voz de 44 mm (1,7")
- Buzina de diretividade constante de 90°H x 60°V
- 4 x pontos de ancoragem M10, 35 mm ø (1,38") cartola para colocação de suporte de alto-falante e flange de montagem em suporte de parede, 2 alças de transporte integradas
- Gabinete adequado para empilhamento
- Versão passiva, amplificador recomendado de 500Wrms/8ohm
- Filtro crossover passivo com "soft-trip" circuito para garantir proteção total do woofer LF e driver HF
- 2 conectores Neutrik Speakon NL 4

- Peso: 16.000kg

Configuração: 2 vias
- Amplificador recomendado: 500 W RMS
Potência de longo prazo: 250 W
- Potência de curto prazo: 1000 W
- Impedância nominal: 8 ohms
Resposta de frequência: 50 Hz 20 kHz 6dB
Woofer de baixa frequência: 1x12 3 polegadas de bobina
Driver de alta frequência: 1 a 1,7 polegadas de bobina
Sensibilidade (@1W/1m): 99 dB
Cont / pico máximo de SPL: 127/131 dB
- Dispersão: 90°; x 60°; HxV
Frequência de cruzamento: 1,6 KHz
Filtro HP recomendado: 45 Hz 24dboct
Conector de entrada: 2 x Speakon
Dimensão líquida (LxAxP): 407x634x370 16x24,9x14,5 mm/polegada
Peso líquido: 16/35,2 kg/lb
Dimensão de transporte (LxAxP): 495x720x470 19,5x28,3x18,5 mm/polegada
Peso de transporte: 18,5 / 40,8 kg / lb

With the new HiMaxX series, FBT establishes a reference point on the scenario of 12" and 15" enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.


The study of a new cabinet in polypropylene, the use of a switch mode power supply and high efficiency power amplifiers and the redesign of the loudspeakers were the activities of the FBT R&D team aimed at maximizing the power weight ratio.
This series comprises three models; two 2-way full-range enclosures in polypropylene, HiMaxX 40 (12"+1") and HiMaxX 60 (15''+1.4"), plus a compact 18'' bandpass SUB in birch plywood (HiMaxX 100Sa).
Compact and light weight, HiMaxX brilliantly solve all the most demanding requests from buffs, musicians and professionals looking for powerful, versatile and very high quality loudspeaker enclosures. Ideal for live and sound reinforcement applications requiring ease of transport, they are also suited to fixed installations, thanks to the cabinets' format and optional accessories.





A powerful dynamic design for aggressive clean-cut lines. A sturdy light-weight box that ensures great versatility and is ready for installation, thanks to its special mounting points and optional accessories. The asymmetrical design enables the enclosures to be used as stage monitors.
A specially designed control panel ensures ease of use and intuitive control. Mic/line input, auxiliary stereo input with (HiMaxX 40a), 3-band EQ, ground-lift, diagnostic LED.
Loudspeaker totally redesigned in collaboration with B&C. FBT studied and designed a special chassis, a more efficient ventilation circuit with a consequent reduction of 2dB "power compression", a considerably stiffer cone to improve reliability and distortion and an even more powerful neodymium magnet to increase control and efficiency. The voice coil has a diameter of 75 mm (3") for higher power handling and reliability.
B&C compression driver with a 25 mm (1'') throat and 44 mm (1.7'') coil (HiMaxX 40) for high power handling. Thanks to the use of a shorting copper cap, high frequencies are even more dynamic and crystal-clear.
The development of the innovative amplifier is the result of years of research by the FBT R&D labs. It manages to combine the contrasting features of lightness, high power, efficiency and reliability, using the very latest technology. A switch mode power supply to reduce the weight and increase the power output velocity, a very high performance PWM amplifier for the low frequencies, to maximize the power fed out with minimum heat dissipation. A Class G amplifier for the high frequencies enables to achieve the audio quality of a Class A, with a much higher output.
The silent preamplifier manufactured with SMD technology has the job of handling the equalization, 24dB/oct crossover, sophisticated protections, limiter and the commands of the control panel.
The horn's profile has been redesigned to ensure greater directivity control and lower distortion. The dispersion angle is 90°H x 60°V.
Research work carried out with the university on the cabinet's resonance and the fl uid dynamics of the air led to the manufacture of a box in polypropylene with injection of absolutely inert GAS and efficient reflex ducts free from undesired turbulence.