Furman SRM-80AE
Monitor Controller
Sale:
-55%
1 This special offer is valid as long as shown here
EUR 629.00
MSRP: EUR 1395.00
EUR 629.00
MSRP: EUR 1395.00
Incl. VAT, free shipping in Germany
Product # | 91860 |
Brand | Furman |
Category | Monitor Controllers | Brand Category | Furman - Controllers |
Release date | May 2005 |
Availability | Not in stock |
Description
The SRM-80A Signal Router/Monitor makes mix-down and dubbing simple, professional and affordable. It facilitates mix-down and dubbing between different media types without tying up additional console channels. Multiple copies can all be made simultaneously through use of the SRM-80A's "Output Select" switches.
Monitoring these sources can be done through use of the SRM-80A’s “Monitor Select” switch, built-in high-power headphone amp, or using the extensive speaker selection system. By simply connecting the control room outputs of your mixer, inputs and outputs of one stereo power amplifier, and up to three pairs of speakers, you will have a highly useful and sophisticated audio monitor system. Since each speaker pair has its own front panel level control, equal loudness can be maintained despite differences in speaker efficiencies. Additionally, one power amp can be used to power two entirely different sets of speakers.
The SRM-80A has balanced inputs and outputs for the SOURCE and A INPUTS, and for the inputs to your power amplifier. INPUTS B through D utilize RCA jacks. The SRM-80A allows easy signal routing between these dissimilar jacks.
The SRM-80A provides a high-resolution 40 LED x 2 bar graph meter to monitor the signal selected for listening. The meter displays a pre-fader signal for accurate monitoring of the signal going to tape or disc. This meter has true VU ballistics (AVG.), or can be switched to Peak Program Mode via the METER MODE switch. The meter also features a slow release-time peak-hold function. This allows easy verification of critical levels, and helps avoid overload (i.e. digital clipping and tape saturation).
The SRM-80A’s Mono Sum feature provides the ability to check for radio compatibility. (Only the send to the headphones/speakers is affected.) While radio airplay is nearly always stereo these days, phasing problems and odd panning arrangements can show up in less than ideal listening environments, such as cars, and many locations in nightclubs. Therefore, it can be beneficial to do a MONO check.
The SRM-80A also features a DIM switch to allow an easy way to lower the listening level temporarily without having to adjust the listening level control.
Monitoring these sources can be done through use of the SRM-80A’s “Monitor Select” switch, built-in high-power headphone amp, or using the extensive speaker selection system. By simply connecting the control room outputs of your mixer, inputs and outputs of one stereo power amplifier, and up to three pairs of speakers, you will have a highly useful and sophisticated audio monitor system. Since each speaker pair has its own front panel level control, equal loudness can be maintained despite differences in speaker efficiencies. Additionally, one power amp can be used to power two entirely different sets of speakers.
The SRM-80A has balanced inputs and outputs for the SOURCE and A INPUTS, and for the inputs to your power amplifier. INPUTS B through D utilize RCA jacks. The SRM-80A allows easy signal routing between these dissimilar jacks.
The SRM-80A provides a high-resolution 40 LED x 2 bar graph meter to monitor the signal selected for listening. The meter displays a pre-fader signal for accurate monitoring of the signal going to tape or disc. This meter has true VU ballistics (AVG.), or can be switched to Peak Program Mode via the METER MODE switch. The meter also features a slow release-time peak-hold function. This allows easy verification of critical levels, and helps avoid overload (i.e. digital clipping and tape saturation).
The SRM-80A’s Mono Sum feature provides the ability to check for radio compatibility. (Only the send to the headphones/speakers is affected.) While radio airplay is nearly always stereo these days, phasing problems and odd panning arrangements can show up in less than ideal listening environments, such as cars, and many locations in nightclubs. Therefore, it can be beneficial to do a MONO check.
The SRM-80A also features a DIM switch to allow an easy way to lower the listening level temporarily without having to adjust the listening level control.
Attributes
Product Details
|
Properties
- Signal routing and monitoring for four stereo devices such as DAT machines, cassette decks, CD recorder/players, MiniDiscs - in addition to main mix from board
- Simplifies mix-down and copying between different media types
- Use one power amp to drive two speaker pairs, also accommodates three pairs of self-powered speakers
- Monitor using three different speaker pairs, at the same loudness, using Furman's exclusive "set-once" level trims
- Speaker button "A" switches line-level for driving self-powered monitors; B and C use a high power relay to redirect your power amp output to either of the two pairs
- Gain adjust for each speaker pair allows for equal loudness when switching between them
- High power headphone amp for private monitoring and mix checking
- 40-segment high resolution metering for L/R monitor outputs
- Familiar VU meter display with peak hold function
- Peak or Average response switch
- DIM button reduces level by 15 dB during interruptions
- MONO sum button to speakers and headphones allows easy identification of mix problems
- Ground lift switch
- Simplifies mix-down and copying between different media types
- Use one power amp to drive two speaker pairs, also accommodates three pairs of self-powered speakers
- Monitor using three different speaker pairs, at the same loudness, using Furman's exclusive "set-once" level trims
- Speaker button "A" switches line-level for driving self-powered monitors; B and C use a high power relay to redirect your power amp output to either of the two pairs
- Gain adjust for each speaker pair allows for equal loudness when switching between them
- High power headphone amp for private monitoring and mix checking
- 40-segment high resolution metering for L/R monitor outputs
- Familiar VU meter display with peak hold function
- Peak or Average response switch
- DIM button reduces level by 15 dB during interruptions
- MONO sum button to speakers and headphones allows easy identification of mix problems
- Ground lift switch
Specifications
Input Impedances:
- Source 24 Kohms
- A Input 24 Kohms
- B Input 40 Kohms
- C Input 40 Kohms
- D Input 40 Kohms
Output Impedances:
- A Output 50 ohms
Monitor Outputs:
- 50 ohms
B, C, D Output:
- < 50 ohms
Sensitivity for 0 VU:
- 0dBu (.775Vrms) or +4dBu (1.23Vrms)
Max. Input Level:
- +21 dBu (8.7Vrms)
Max. Output Level:
- +27dBu (17.34Vrms)
Noise:
- 95dBu 20Hz to 20kHz.
THD + N:
- 0.002% maximum
Crosstalk:
- 83dB minimum @ 10kHz
Connectors:
- Balanced TRS input and output jacks.
- RCA jacks for “B,” “C” and “D” inputs and outputs.
- HEADPHONE OUTPUT
Output Impedance:
- 56 ohms
THD + N:
- 0.001% with 800mW driving a 150 ohm load.
- SPEAKER OUTPUT SWITCHING
- 8A / 240V
- Connectors: Power amp and speaker connectors: 5-way binding posts
- METERS
Accuracy:
± 0.5 dB
- Source 24 Kohms
- A Input 24 Kohms
- B Input 40 Kohms
- C Input 40 Kohms
- D Input 40 Kohms
Output Impedances:
- A Output 50 ohms
Monitor Outputs:
- 50 ohms
B, C, D Output:
- < 50 ohms
Sensitivity for 0 VU:
- 0dBu (.775Vrms) or +4dBu (1.23Vrms)
Max. Input Level:
- +21 dBu (8.7Vrms)
Max. Output Level:
- +27dBu (17.34Vrms)
Noise:
- 95dBu 20Hz to 20kHz.
THD + N:
- 0.002% maximum
Crosstalk:
- 83dB minimum @ 10kHz
Connectors:
- Balanced TRS input and output jacks.
- RCA jacks for “B,” “C” and “D” inputs and outputs.
- HEADPHONE OUTPUT
Output Impedance:
- 56 ohms
THD + N:
- 0.001% with 800mW driving a 150 ohm load.
- SPEAKER OUTPUT SWITCHING
- 8A / 240V
- Connectors: Power amp and speaker connectors: 5-way binding posts
- METERS
Accuracy:
± 0.5 dB
Documents (1)
Brand
Report incorrect data about this product
Recommended accessories