Dynamic microphone MD300
The MD300 is a high-quality dynamic microphone with
with a frequency response that has been optimized for high frequency testing.
It is particularly characterized by a detailed
Resolution at high frequencies and a balanced low frequency response
Transmission of low frequencies. Due to the cardioid directional characteristic
it reacts insensitively to movements of the sound
Sound source.
The MD300 is suitable as a close pickup microphone for
For radio announcers as well as for high-quality recording of vocals or instrumentals
Recording of vocal or instrumental soloists in live applications
or as a spot microphone in music production.
Acoustic properties
The sound transducer in the MD300 is a dynamic capsule
with a cardioid polar pattern.
The frequency response is optimized for low recording distances,
with a boost of approx. 2 dB between 2 kHz and
8 kHz to increase the speech and high frequency response. The
frequency response caused by the proximity effect at low frequencies
at low frequencies is balanced, so that even with a low
so that even at a short speaking distance
does not result in excessive overemphasis.
Electrical properties
The sound transducer used in the MD300 operates according to the
Moving coil principle. The microphone is connected via
a three-pin XLR-male connector with balanced wiring
Wiring. Due to the low impedance output
low noise operation is possible even with long cable runs
Operation is possible. The polarity of the microphone complies with
dIN 60268-4.
Mechanical properties
The microphone housing has an integrated internal thread on the plug side,
with which the elastic or rigid holders available as accessories can be
or rigid holders available as accessories can be attached. This enables
Operation on microphone arms or tripods is just as possible as
use as a handheld microphone. The capsule is elastically suspended in the housing
elastically suspended in the housing to absorb structure-borne noise and shocks
damping. If greater attenuation of this type of noise is required, this can be achieved by using the
this can be achieved through the use of the
available as accessories.
Due to the weight of 330 g without accessories, even longer use as a hand-held microphone is unproblematic
Operation as a handheld microphone is unproblematic.
The following accessories are optionally available for the MD300:
Microphone holder MH80, Swivel microphone holder MH30, Elastic suspension EA 30, Elastic suspension EA 92
black matt, microphone connection cable C70