Palmer PLI05 / BALUN

Symmetrical or asymmetrical, that is no question with the BALUN/ PLI05 . BALUN stands for Balanced-Unbalanced. This means that due to the TRS (stereo) jack sockets used in the PLI05 , both input and output can be operated symmetrically or unbalanced. The PLI05 is the little sister of the PLI02. Both boxes can be used to convert from symmetrical to asymmetrical; both boxes contain so-called line isolating transformers and are used for galvanic isolation. They are connected between mains-operated audio devices and thus reliably exclude ground loop hum. The PLI02 is designed for the use of XLR connectors and is designed for low impedances (600 [Ohm]). The PLI05 on the other hand, with jack sockets is better suited for higher impedances. It can be operated in a wide range from 600 [Ohm] to over 10 k[Ohm]. However, in order to keep level losses low, the input impedance should not be greater than the output impedance. Both devices are suitable for high levels up to +20 dBu.