Deutschland
EN
  • Log in

Reverend Guitars Manta Ray HB (midnight black)

Reverend Guitars
Warm and lively ES-Style semi acoustic.

Warm and lively, with the acoustic richness and overtones of a full size semi-hollow. Round enough for jazz, but this ray can sting too, with plenty of sustain and attack for rock and blues. The 1-3/4? thick body is slim and manageable and the flat top has a clean, fresh look. Solid wood construction is featured throughout, with no plywood. The back, sides and center block are produced from one slab of Korina which is routed from the top, and capped with a solid maple flat top. Excellent sustain and attack are coupled with substantial resonance, for a complex and responsive tone.
CUSTOM PICKUPS

CUSTOM PICKUPS

We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching.

KORINA BODY

KORINA BODY

Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.

BASS CONTOUR

BASS CONTOUR

This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

PIN-LOCK TUNERS

PIN-LOCK TUNERS

A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

INITIALED HEADSTOCK

INITIALED HEADSTOCK

Every Reverend is hand initialed on the back of the headstock by Zack Green, our highly skilled technician who sets up, inspects, and tests every instrument.

CUSTOM DOME KNOBS

CUSTOM DOME KNOBS

Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

DUAL-ACTION TRUSS ROD

DUAL-ACTION TRUSS ROD

Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It?s also located at the headstock for easy access.

BONEITE NUT

BONEITE NUT

We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

CUSTOM JACK PLATE

CUSTOM JACK PLATE

Our proprietary jack plate features four mounting screws, instead of two. The extra screws prevent the plate from tearing out of the body. Made of steel for durability, the laser etched logo adds an extra touch of class!

PURE TONE JACK

PURE TONE JACK

All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

TREBLE BLEED CIRCUIT

TREBLE BLEED CIRCUIT

All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

10% POTS

10% POTS

We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.

10% POLY CAPS

10% POLY CAPS

We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they?re more consistent. Made of polyester, they?re also longer lasting, and less affected by temperature than cheaper ceramic caps . Typically used in expensive boutique guitars.

PLAYED BY

PLAYED BY

Paul Cuddeford / Lisa Ronson, Holy Holy

PLAYED BY

PLAYED BY

Mike Bray / Tenacious D, Kyle Gass Band

PLAYED BY

PLAYED BY

Tito Jackson / The Jacksons

PLAYED BY

PLAYED BY

Browan Lollar St. Paul and the Broken Bones

PLAYED BY

PLAYED BY

J Navarro / Suicide Machines, Break Anchor, Hellmouth, J Navarro and the Traitors

PLAYED BY

PLAYED BY

Sam Williams / Down By Law

  • - Body: Semi-Hollow Korina, Solid Maple Top
  • - Pickups: Special H bridge, Special H neck
  • - Bridge: Tune-O-Matic with Stop Tail
  • - Neck: Three-Piece Korina
  • - Scale: 24 3/4"
  • - Neck profile: Medium Oval
  • - Fingerboard: Blackwood 12" Radius
  • - Frets: 22 Medium Jumbo
  • - Truss rod: Dual Action - Headstock Access
  • - Tuners: Reverend Pin-Lock
  • - Nut: 43mm Width - Boneite
  • - Controls: Volume, Tone, Bass, Contour, 3-Way
  • - Strings: 10-46

Key attributes
Pickup Types
HH
Colour
Black
Body Shape
Double Cutaway
Fingerboard Material
Blackwood
Body Material
Maple
Body
Guitar Construction
Semi-Hollow Body
Orientation
Right-Handed
Top Material
Maple
Neck
Fingerboard Radius
12"
Neck Material
Korina
Guitar Scale
24.75"
Number of Frets
22
Fret Size
Medium Jumbo
Nut Width
43mm
Nut Material
Bone
Hardware
Bridge Type
Fixed
Hardware Finish
Nickel/Chrome
Silver
String Gauge
.010"
Coil Split
No
Including Bag
Not included
Semi-Hollowbody Electric Guitar attributes
Guitar Finish
Satin
Unit
1 piece(s)
Product Details
Product Number
197410
Brand
Reverend Guitars
Series
Set-Neck Series
Category
Semi-Hollowbody Electric Guitar
Brand Category
Reverend Guitars - Semi-Hollowbodies
Relevancy rank in Category Semi-Hollowbody Electric Guitar
177 of 216
Date
December 2018
Dimension
Weight
3.4kg
Gross Weight
4.9kg
Related Products