SE Electronics DM2 T.N.T

The DM2 T.N.T is an active inline preamplifier that is based on the design of the sE DM1, but offers even more gain and less noise with greater flexibility. With the integrated, recessed switch, a clean, transparent gain of moderate 15 dB or explosive 30 dB can be selected - more headroom and an extremely clean signal with an ultra-high-impedance input and eight selectable load settings for perfect adaptation to any microphone. It is suitable for direct connection to the output of a passive ribbon or dynamic microphone, so that no additional cable is required. Switchable, clean amplification from a moderate 15 dB to an explosive 30 dB Two amplifier stages provide even greater flexibility with different microphones, designed for neutral, balanced sound quality and extremely low noise. The uncompromising design amplifies the signal regardless of load impedance or cable length. The DM2 T.N.T can be perfectly combined with any passive microphone, boosts the signal, reduces the occurrence of interference and provides a significantly better level for the preamplifier of the audio interface / mixer - all without noise and discoloration! Get the most out of the microphone thanks to the variable input load Conventional inline preamplifiers, due to their electronic design, tend to stress the transducers of passive microphones, which leads to a deterioration in sound quality and output level. The ultra-high impedance input of the DM2 T.N.T promises the best possible signal quality, regardless of the load on the microphone. The selectable impedance of the DM2 invites you to experiment - it can be set in the range from unconventionally low 50 Ω to astonishingly high 10 MΩ in order to adapt the preamplifier to each microphone and to achieve a clean recording with the lowest possible noise. The DM2 T.N.T was developed to get the best sound characteristics out of a microphone. Sophisticated Class A electronics with an additional output stage With a sophisticated electronic design and specially selected high-quality FET transistors, the DM2 T.N.T has the lowest self-noise in its class and enables effortless recording in studio quality. In contrast to other commercially available inline preamplifiers, the DM2 T.N.T delivers a constant gain of +15 dB / +30 dB regardless of the connected load. As an ideal tool for sound engineers, the output impedance of the DM2 T.N.T is also the lowest in its class, making it easy to negotiate long cable runs while reducing susceptibility to RF interference, hum and noise. Slim, robust all-metal housing with a premium finish Even in the most demanding of environments, the DM2 T.N.T can score with a slim all-metal design that is suitable for the stage, a robust construction, high-quality manufacturing standards and a gold-plated XLR connector for reliable loss-free signal connection, whether on stage or in the studio. With its exceptionally practical, phantom-powered design that does not require an external power supply, the sE DM2 T.N.T is the ultimate game changer in your pro audio arsenal.