500kOhm, A Log. Audio Taper

Hose for pickup assembly (instead of spring)

PVC, pluggable, 0-10

Speed ​​Knobs (Qty 2), Black, Vintage Style, fits USA split shaft pots. 1/2" height.

500K Audio Pot, CTS, 24 spline split knurled shaft with nut, lock and dress washer.

Threaded bushing is 3/8" tall

8 pieces, humbucker frames, 13mm

Audio Taper, Split, Knurled Shaft, With Nut and Washer. Threaded bushing diameter ~.371", threaded bushing height 3/8", shaft diameter ~.232".

500Kohm, blend

Dual 500K Blend/Balance Audio Taper Pot, With Center Detent, With Hardware

PVC, pluggable, 0-10

Bell Knobs (Qty 2), Vintage Style, fits USA split shaft pots

4pcs, pickup assembly, inch (US thread)

On/On/On; Mini switch

On-On-On Mini Switch, DPDT, With Mounting Hardware, Chrome 5/16" thread bushing height; 1/4" diameter hole; 5/8" body depth cavity needed.

Switch Knobs (2 pieces) for Gibson Guitars

Switch Knobs (2 pieces) for Gibson Guitars, Amber

Extra Nuts for Pots and Input Jacks, Chrome 3/8" x 32 thread

Extra Nut for Pots and Input Jacks, Chrome 3/8" x 32 thread

1/4 Input Jack, Stereo, Switchcraft 12B, with nut and washer. A stereo input jack is used for stereo wiring, or to turn on/off onboard active systems when the plug is inserted.

Switch Knobs (2 pieces) for Gibson Guitars

ON/ON/ON

On-On-On Mini Switch, DPDT, With Mounting Hardware, Black 5/16" thread bushing height; 1/4" diameter hole; 5/8" body depth cavity needed.

- String rider suitable for Stratocaster®

- Curved, vintage style

- 55mm spacing

250K push / pull audio taper potentiometer. Threaded portion is approximately 9.35 mm diameter. 35mm from bottom of pot to top of threaded portion. Pulls out 4 mm. Includes nut and washer.

Compensated bone saddle for acoustic guitar, radiused top 3" x 7/64" x 11/32.

Material: Standard Bone

Packaging: Single item

Version with small clamp for tremolo blocks with a thickness of max. 8mm.

Can be adjusted precisely. Three modes: Hardtail (blocked), Dive only, Floating.

3.5ft Black & 3.5 ft White (Please see pic of GW 0820-023 & GW 0820-025 from which this is made). Vintage Style, push back, cloth covered wire, 22 gauge, Unshielded, single conductor, stranded wire with a waxed braided cotton outer insulation..

Mini switch on/on

DPDT (double pole/double throw)

Flat lever

Bullet guitar jack tightening tool. Prevents jack from spinning when tightening.

Pickup switch straight