ABY Box/Line Selectors

Hum and noise-free switching

High-impedance LEHLE TRANSFORMER HZ with phase and ground switch

Two different operating modes

Eliminate Ground Loop Hum

Correct Phase

Buffered Output

Product type - Switches

Type - amp switcher

Switching function - output switcher

A good solid A/B box can be a guitarist's best friend.

We make ours from a Hammond 1.5"x3.6" metal enclosure with high quality jacks and switch. We also include a dual color (red/green) LED to let you know by sight if your using A or B.

Type: A/B/C

LED Display: Yes

PSU Connector: Yes

Compact line selection pedal for connecting and switching between multiple amplifiers and effects devices

Type: A/B/Y

LED Display: Yes

PSU Connector: Yes

Passive switcher.

Connect a single guitar to two amplifiers or two guitars to a single amp and easily set up an extremely flexible and tonally diverse rig.

Routes single instrument input signal to two separate output amp paths.

Select between two separate signal paths or run both simultaneously.

Affordable A/B selector with 1-click operation and silent switching

2-way selector for using A/B input with one output, or vice-versa

Instantly change guitars, amplifiers or switch between an amp and tuner

A / B / Y switcher

180° / NORM control button for inverting the phase

GRND / LIFT control button for lifting the ground

Instant recall, no delay at all.

Relay Truebypass design.

Individual Tuner/Mute switch

A+B switch and true bypass looper for effects pedals

footswitches provide control over two independent send/return loops

high quality BJF buffer (switchable)

A/B switch for effects pedals and signal routing

can be used as input or output selector

inputs and outputs can be used in both directions

Can be used as input or output selector

Inputs and outputs can be used in both directions (one input to three selectable outputs or three selectable inputs to one output)

True bypass

True Bypass

LED: effect on

Footswitch: effects bypass

Choose True Bypass or Preamp Buffer

Multiple Guitar Switching Made Easy

Road Ready

Can be used as input or output selector

Inputs and outputs can be used in both directions (one input to two selectable outputs or two selectable inputs to one output)

Choose between A or B (separate) or A and B (combined)

Designed to route two input signals to two output sources

Each input has its own level control to balance different input levels

Choose output between A or B (separate) or A and B (combined)

A / B / C switcher

2x 180° / NORM control button for inverting the phase

2x GRND / LIFT control button for lifting the ground

Current Draw: 40mA

Input Impedance: 1M Ohm

Output Impedance: 1K Ohm

Symmetrical, passive source switch

Designed to switch between two dynamic microphones or two other audio sources.

Audio circuit type: Classic Class-A FET

Frequency response: 30Hz - 30kHz

Dynamic range: 116dBu

speaker cabinet combiner

for connecting 2 speaker cabinets to one amp head

multiple routing options

effects loop switcher for two amps

transformer isolated class-A FET circuit

share effects between 2 amp's effects loops

Symmetrical, passive output switch