ART SPLITMix4

The SPLITMix4 is a fully hybrid passive mixer that offers a wide variety of configurations. You can even configure the stereo input channels SPLITMix4 as 4 through 4 independent stereo output level attenuators to 4 channels. Independent stereo level controls are provided on each channel. All connections are 1/4-inch stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use. The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedance.