Boss NS-2 Noise Suppressor
EUR 108.50
EUR 129.00
In stock
Expected delivery: 27 Jan - 29 Jan to your country (DE)
Free delivery in Germany
| Product # | 40427 |
| Brand | Boss |
| Series | Boss Compact Pedal |
| Category | Noise Gate Pedal |
| Brand Category | Boss - Noise Gate |
Recommended accessories
A "Must-Have" Pedal!
Eliminate unwanted noise and hum without altering your tone. A unique noise detection circuit preserves the natural attack and envelope, leaving your playing and dynamics intact.
The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.
- Owner's manual
- Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
- Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
- - Compact noise suppression pedal for eliminating noise and hum in guitar and bass effects and amplifier setups
- - Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound
- - Threshold and Decay knobs allow for shaping the elimination/suppression as desired
- - BOSS 5-year warranty
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls:
MODE selector switch
DECAY knob
THRESHOLD knob
Pedal switch
Indicator:
CHECK/MUTE indicator (Used for indication of check battery)
REDUCTION indicator
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
DC IN jack
9V DC OUT jack
Power Supply:
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
- Current Draw: 25 mA
Expected battery life under continuous use:
Carbon: Approx. 11 hours
Alkaline: Approx. 24.5 hours
These figures will vary depending on the actual conditions of use.
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
- Bypass: Buffered bypass
Controls:
MODE selector switch
DECAY knob
THRESHOLD knob
Pedal switch
Indicator:
CHECK/MUTE indicator (Used for indication of check battery)
REDUCTION indicator
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
DC IN jack
9V DC OUT jack
Power Supply:
Carbon-zinc battery (9 V, 6F22) or Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)
- Current Draw: 25 mA
Expected battery life under continuous use:
Carbon: Approx. 11 hours
Alkaline: Approx. 24.5 hours
These figures will vary depending on the actual conditions of use.
| Product Dimensions | |
|---|---|
| Depth | 67mm |
| Width | 148mm |
| Height | 91mm |
| General Information | |
|---|---|
| Manufacturer information | Roland Corporation
5100 S. Eastern Ave, Los Angeles 90040-2938 Los Angeles United States |
| Product Warranty | |
|---|---|
| Years | 5 |
| Details | Gültig nachdem Garantieschein eingeschickt wurde. |
| Product Details | |
|---|---|
| Product Number | 40427 |
| Brand | |
| Series | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Noise Gate Pedal | |
| Date | April 2003 |
| Product Quantity | |
|---|---|
| Unit | 1 piece(s) |
| Dimension | |
|---|---|
| Weight | 0.46kg |
| Box Depth | 455mm |
| Box Width | 148mm |
| Box Height | 44mm |
| Gross Weight | 0.56kg |
Related Products
(20)
View different language product reviews (18)
i appreciate the sound of silence ...
Great piece of kit that removes buzz, hum and other noise from your signal effects chain. Does what is advertised well and with no fuss. Especially useful for use with overdrives, distortion effects. Note that efficient operation depends on using the send/return loop in the unit. Depending on how your pedal board is set up, you'll need to consider cables of appropriate length. I have an MXR dynacomp, Electroharmonix Soulfood Overdrive and Boss Distortion: with this set up, cables of around 60cm with right-angled jacks is about right. Note that time-based effects like delays and loopers should be placed after the NS-2 chain.