Brennenstuhl Secure-Tec (10x T13m Master-Slave)

The automatic power strip from Brennenstuhl 's Secure-Tec series impresses with its master-slave function and surge protection. In addition to a master and seven slave sockets, the strip has two permanent sockets that allow constant operation. With a leakage current of up to 19,500 A, you protect valuable devices from overvoltages. Convenient master-slave function With the on/off switch of a single device that is plugged into the master socket, all other devices in the slave sockets can be automatically switched on and off. For example, use a computer as the master device, which includes monitors, printers, modems, etc. as slave devices in the automatic control. As soon as the computer is turned on, its power consumption increases. The intelligent electronics of this power strip recognize this and automatically switch on the slave sockets. After shutting down the computer, its power consumption drops back to standby. This is also recognized by the power strip and the slave sockets are switched off completely after a delay. Of course, combinations with TV, radio or receiver can also be controlled. Protection against sudden voltage peaks The built-in surge protection device prevents devices connected to the power strip from being damaged by voltage peaks in the network, which can be caused, for example, by indirect lightning or by switching inductive loads such as motors, ovens or lamps. The permanent sockets are also protected against overvoltage and are constantly switched on, regardless of the digital master-slave function, as soon as the main switch is switched on. The power strip can be switched off completely using the two-pole, illuminated main switch.