Skip to main contentSkip to navigationSkip to search

DSM & Humboldt Dumblifier Overdrive Special

Amp Simulator Pedal
DSM & Humboldt
Loading video player...
EUR 599.00
Expected delivery: Tue, 19.5. and Thu, 21.5. to your country (DE)
1 unit in stock. Available online only in Germany
Free delivery in Germany
Authentic Dumble tone, true analog feel, and all-in-one versatility in a premium pedal.

Why the Dumblifier Overdrive Special? For decades, guitarists around the world have dreamed of capturing the magic of the mythical Dumble Overdrive Special. Until now, the only way to approximate this experience has been through digital modeling—solutions that may reproduce the sound, but always fall short of replicating what truly makes these amps legendary: the feel under your fingers. The Dumblifier Overdrive Special by DSM Humboldt Electronics breaks that barrier. By using our proven analog amplifier modeling technology, we have not only recreated the tone but also the unique compression and touch response that makes every note bloom, sustain, and sing—just like on the original amps. What sets us apart? Analog accuracy: Unlike digital processors, the Dumblifier responds organically to your playing dynamics, delivering the unmistakable “punchy compression” and smooth sustain that Dumbles are known for. Direct access to the real thing: Beyond studying schematics, recordings, and every available piece of information, we had the rare opportunity to spend time with a genuine 1970’s Dumble ODS in Tokyo, Japan. Thanks to a devoted DSM Humboldt fan, we were allowed to test and analyze this priceless relic, an experience that gave us invaluable insights to fine-tune the Dumblifier’s design. Beyond boutique limitations: Until now, the few available alternatives were extremely expensive and produced only in limited, made-to-order quantities, never intended for mass availability. True versatility: Other so-called “Dumble-style” pedals are meant to run in front of amplifiers, so the final tone depends mostly on the amp itself. The Dumblifier, however, goes further—it can operate as a complete analog amp replacement with cab-sim and stereo features, or as a two-channel overdrive pedal in front of any rig. Its TRS outputs with cab-sim bypass make it extraordinarily flexible. All-in-one solution: With stereo FX loop, stereo reverb, cabinet simulation, and DI outputs, the Dumblifier is equally at home on stage, in the studio, or in your practice setup. Why will it be a success? No compromises: It is the first true analog solution that captures both the sound and the feel of a Dumble. Plug-and-play convenience: Packed into a pedal format, offering all the features gigging and recording musicians demand—without the cost or fragility of a boutique tube amp. Global appeal: Guitarists everywhere crave the legendary Dumble sound. By making it accessible, reliable, and portable, the Dumblifier unlocks that dream for players worldwide. The Dumblifier Overdrive Special comes with: Two channels: CLEAN and OVERDRIVE. The clean Channel is in series with the Overdrive Channel, so the Clean level affects the gain of the Overdriven tones. Both Channels share the EQ and preamp tone switches. The Overdrive Channel has Gain and Ratio controls. The Ratio controls the level of the OD channel to balance it with the Clean Channel Level. PAB Boost: The PAB (Pre-Amp-Boost) is a staple feature on every Dumble ODS amp. It Bypasses the tone stack, adding around 10dB (depending on the EQ settings) to the preamp gain. Note: The Tonestack is defeated when the PAB is activated. Bright Switch: Boosts the high frequencies at lower Clean levels. At full clean level it has no effect. Mid Boost Switch: Boosts the mid and low mid range, producing a full bodied tone, very nice with single coils! Rock/ Jazz Switch: Changes the behaviour of the tone stack. Rock is a classic FMV tonestack, and Jazz is a Baxandall-James configuration. Jazz mode has less gain, but increased band independence and range. Power amp section: The Dumblifier replicates the nuances of the Dumble power amp design. The clean Level and RATIO volumes set the input gain into the power amp, so you can adjust the power amp compression and drive by setting the Power amp Master Level in conjunction with the Ratio and Clean Level. Higher preamp levels and low master gives more compression and vice versa. The presence controls the amount of mid-hi and high frequencies. It has a wide range in order to adapt the pedal to different types of amplifiers. Stereo FX loop: The FX loop has a mono send from the amplifier’s output, and a dual return. For mono effects use the left (mono) return. Stereo Reverb: After the FX loop, a stereo reverb effect is applied to the signal. You can control the amount of reverb with the REVERB knob in the front of the pedal, and select 3 types of reverb (Room, Ethereal, and Plate). The Reverb can be switched On and Off with the REV/PAB footswitch when the footswitch function switch is on the “REV” position. Stereo Cabinet Simulation: For each channel (left and Right) you can select the Speaker type and the Cabinet Type: Speaker Type: - G12M: Greenback Speaker, defined highs and ready to Rock. - G12H: Cream Back, smooth and jazzy. - EV12L: Sparkly, detailed, and with a lot of bite. Cab Type: - 2x12: Open Back 2x12 with present Mids and round overall response with extended low end. - 1x12: Open Back 1x12 Combo. Less boomy, presence in the higher midrange. - 4x12: Closed Back Stack. Strong resonant low end and flatter response. Input boost switch: The Dumble ODS features a JFET boost input. The Input Boost switch gives you the option to boost -8dB (Low) or +12dB (High). Low output guitars benefit from low boost to get the most of the Dumblifier. Also, on high boost, you can use the clean channel as a crunch channel and clean it up with the guitar volume knob. Aux select switch: Selects if the Aux signal is reproduced only on the headphones or also on the outputs. DI out: DI out Left and Right. The Cabinet simulation is always activated on these outputs. TR Outs (R&L): The TR outputs have switches to select if the cabinet simulation is included or not. Use Cab bypass if connecting to a guitar amplifier (input or fx return) or if using an external cabinet simulation. Use Cabinet simulation if using a flat (FRFR) response amplifier, or into a mixing console or recording board. HEAVY DUTY, custom-made anodized aluminum enclosure with a sandblasted finish. Wooden side panels add a unique touch and premium feel.

  • - Analog Accuracy
  • - Real Dumble Inspiration (1970s Dumble ODS)
  • - True Versatility (Amp replacement or Overdrive pedal)
  • - All-in-One Solution (Stereo FX loop, reverb, cabinet simulation, DI outputs)
  • - No Compromises (True analog Dumble sound and feel)
  • - Two Channels (Clean & Overdrive)
  • - PAB Boost (Pre-Amp Boost with up to 10dB gain)
  • - Bright & Mid Boost Switches
  • - Rock/Jazz Tone Stack Switch
  • - Power Amp Section Replication (Compression and drive control)
  • - Stereo Reverb with 3 Types (Room, Ethereal, Plate)
  • - Stereo Cabinet Simulation (Multiple speaker and cabinet types)
  • - Input Boost Switch (-8dB or +12dB)
  • - TRS Outputs with Cab-Sim Bypass
  • - Heavy-Duty Construction (Anodized aluminum enclosure, wooden side panels)
  • - Global Appeal (Accessible, portable, and reliable Dumble sound)

- Low Power Consumption: 200mA / 9V center negative
- Channels: Two (Clean and Overdrive)
- Shared EQ and Tone switches for both channels
- Bright Switch: Boosts high frequencies at lower Clean levels
- Mid Boost Switch: Boosts mid and low-mid range
- Rock/Jazz Switch: Selectable FMV (Rock) or Baxandall-James (Jazz) tone stacks
- Pre-Amp Boost (PAB) with up to +10dB gain (Bypasses the tone stack when activated)
- Adjustable Clean Level and Ratio for input gain
- Power Amp Master Level for compression control
- Presence control for mid-high and high frequencies
- Stereo FX Loop: Mono send, dual returns
- Stereo Reverb: 3 selectable types (Room, Ethereal, Plate) - Reverb depth control via the front panel
- Speaker Types: G12M (Greenback), G12H (Creamback), EV12L (Sparkly)
- Cabinet Types: 2x12, 1x12, 4x12
- JFET Boost with two settings: -8dB (Low) and +12dB (High)
- Aux Select: Selects whether the Aux signal is heard through headphones or also through the outputs
- DI Out (Left & Right): Cabinet simulation always active
- TRS Outputs (Left & Right): Cab-sim bypass option for guitar amp or external cab simulation
- TRS Outputs: Can output cabinet simulation for flat-response amps, mixing consoles, or recording setups
- REV/PAB Footswitch to toggle Reverb or Pre-Amp Boost
- Footswitch switchable for bypass or active effects
- Enclosure: Heavy-duty anodized aluminum with sandblasted finish
- Side Panels: Premium wooden side panels for a high-end feel
- Operates via 9V DC power supply (not included)
- Current draw: 200mA

Key attributes
Battery Operated
No
Effect Types
Amp & Cab Simulator
True Bypass
Yes
Product Dimensions
Depth
115mm
Width
135mm
Height
65mm
General Information
Manufacturer information
MusiX GmbH
Schildgasse 12
79618 Rheinfelden (Baden)
Germany

manufacturerinfo@musix.com
Amp Simulator Pedal attributes
PSU Included
No
Analog/Digital
Analog
Output Configuration
Stereo
Input Configuration
Mono
Mini Form
No
Voltage
9V
Product Details
Product Number
254426
Brand
DSM & Humboldt
Category
Amp Simulator Pedal
Relevancy rank in Category Amp Simulator Pedal
3 of 33
Date
January 2026
Product Quantity
Unit
1 piece(s)
Dimension
Weight
0.42kg
Box Width
135mm
Gross Weight
0.76kg
Related Products