Laney TI100 Tony Iommi Signature / Limited Edition
| Product # | 253288 |
| Brand | Laney |
| Category | Guitar Amplifier Head |
| Brand Category | Laney - Heads |
UK MADE
Handcrafted in our UK Black Country Customs workshop. Where we still build high-end tube amps with all the care and attention that we have been doing for the last 6 decades.
ALL TUBE
This limited edition TI100 features 100 watts RMS, 8 x 12AX7 loaded preamp and a 4 x 6L6 output section giving you masses of modern, smooth, tube amp tone.
DUAL CHANNELS
The TI100 features both LEAD & RHYTHM channels. Both channels offer serious amounts of GAIN but have subtle differences in the character of each. The RHYTHM channel gives you a particularly pleasing edge of break up tone whilst the LEAD channel offers tonnes of liquid smooth gain. The TI100’s gain is renowned and should be heard to be believed. The TI100 offers a super tight responsive low end great for down tuning. The TI100 is a truly versatile amp!
SWITCHABLE PRE-BOOST
Hitting the front end of an amp harder makes everything sound better. This is just like having your favourite boost pedal sat in front of the amp giving you all the rich harmonic tonal content of a tube amp run hard.
3 BAND EQ
The TI100’s powerful 3 band EQ allows you to dial in the exact tone you are looking for at any volume.
ENHANCE & PRESENCE
The ENHANCE and PRESENCE features on the TI100 are really useful in dialling in the amps response you are looking for. The ENHANCE control allows control over the response of the amplifier to lower frequencies. Turning the control clockwise gives a looser low-end feel, while lower settings provide a tighter, punchier response. The PRESENCE control sits in the output stage of the TI100, and it allows you to tune the higher frequency content of the TI100’s 6L6 equipped output section.
PRE AMP/POWER AMP LOOP
PRE AMP-OUT: The TI100 gives the user the option of adding an additional amplifier in a multi-amp setup where a single TI100 preamp can drive several power stages. POWER AMP IN: This socket provides the user with an input to the power amplifier stage. Idea for connecting a pair of TI100, or any other amp for that matter.
FX LOOP
The TI100’s effects loop is ultra transparent and is capable of handling everything from vintage pedals to high end rack mount units. It can be used in 3 different modes depending on the effects you are using. If you aren’t using effects then the bypass mode hardwires it out of the signal path. The FX return level allows you to trim the return level to make sure nothing is lost when gain wise when using external effects.
FS4-TI
In order to remotely switch the TI100 each unit is supplied with a dedicated custom FS4-TI. Anything that is switchable on the front panel can now be switched at your feet.
TOP MOUNTED GRAB HANDLES
The TI100 is fitted with sturdy top mounted grab handles for ease of transport. These ergonomically designed handles make carrying your TI100 to your next gig as comfortable as it can be.
ICONIC LIVERY
Guitar players listen with their eyes! Not only does the TI100 sound amazing it looks amazing too! Finished in the icon cross livery of Tony Iommi the TI100 look a million dollars in any venue as it glows RED!
CASE CANDY
Each Limited Edition TI100 is personally signed by Tony Iommi and comes with an individual COA, 4 custom commemorative postcards and a set of Tony Iommi pics
CUSTOM SLIPCOVER
Handcrafted in our UK workshop - Black Country Customs - each TI100 head includes a custom cover to keep your collector’s item in top condition.
- Custom Slipcover
- - Twin Channels – Lead & Rhythm
- - Switchable Pre-Boost on both channels – LED Indicates active
- - 3 Band EQ – Independent Bass, Mid & Treble on Each channel
- - Volume – independent on each channel
- - Enhance – Independent on each channel
- - Presence – Independent on each channel
- - Power Amp in socket
- - Pre Amp out socket
- - Sym Link Sockets
- - FX-Loop – Side Chain – Insert -Bypass modes with FX return Gain Control
- - Footswitchable channels
- Pre-Boost ON/OFF on each channel with supplied FS4-TI
- - Finished in Tony’s cross’s livery
- - Internal red glow
- - Loudspeaker outputs 4 Ohms, 8 Ohms, 2 x 8 Ohms, 16 Ohms, 2 x 16 Ohms
- - Top mounted grab handles
- - 8 x 12AX7 Pre Amp Tubes
- - 4 x 6L6 Output Tubes
- - Supplied with Ltd edition custom slip cover
- - Supplied with a signed certificate of authenticity, a selection of Tony Iommi picks and four commemorative limited-edition postcards.
- - Signed and numbered backplate
- - FS4-TI Footswitch supplied
- Inputs: Single
- Channels controls: Pre-Boost, Volume, Drive
- Equalisation: Bass, Middle,Treble, Enhance and Presence per channel.
- Preamp valves: 8x ECC83
- Output valves: 4x 6L6
- Class: AB
- Line out: Yes (from Preamp)
- Line in: Yes (from Power amp)
- Speaker connections: 1x 16 Ohm, 2x 16 Ohms - 1x 8 Ohm, 2x 8 Ohm - 1x 4 Ohm.
- FX Loop(s): Send & return jacks assignable to modes - BYPASS, INSERT & SIDE CHAIN.
| Key attributes | |
|---|---|
| Power | 100W |
| Channels | 2 |
| Reverb | No |
| Including Footswitch | Yes |
| Guitar Amplifier Head attributes | |
|---|---|
| MIDI Interface | No |
| Effects Processor | Yes |
| External FX Loop | Yes |
| Line Input | Yes |
| Recording Output | Yes |
| Connection For External Speaker | Yes |
| Headphone Output | No |
| Footswitch Connection | Yes |
| Unit | 1 piece(s) |
| Product Details | |
|---|---|
| Product Number | 253288 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Guitar Amplifier Head | |
| Date | June 2025 |