EUR 166.00
EUR 268.00
4 units in stock
Expected delivery: 27 Jan - 29 Jan to your country (DE)
Free delivery in Germany
| Product # | 210668 |
| Brand | Palmer Musical Instruments |
| Category | Nearfield Monitor |
| Brand Category | Palmer - Nearfields |
Accessories
Recommended accessories
Powered 5" Reference Nearfield Studio Monitor
A basic requirement for any studio is that the mix is accurate and that it's reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5" woofer with rubber surround and a 0.75" tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker's features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Accessories (included): Power cord
- - 5" woofer and 0.75" soft dome tweeter
- - Bass reflex design
- - 60-W RMS bi-amping power amplifier
- - 70 Hz to 20 kHz frequency response
- - Balanced XLR and 6.35 mm stereo jack input
- - Compact design
- - Elegant and robust housing
Type: Studio monitor
Low/mid driver dimensions: 5 "
Woofer size: 127 mm
Woofer magnet: 80 mm Ferrit
Woofer brand: Custom-made
HF driver dimensions: 0.75 "
HF Driver Size: 19 mm
HF driver magnet: 28 mm Neodym
HF driver brand: Custom-made
Power amplifier (Class A): Class A/B
Dispersion (H x V): 120 ° x 120 °
RMS: 2 x 30 W
Frequency response: 70 - 20.000 Hz
Crossover frequency: 2500 Hz
Max. SPL: 110 dBU @ 1 kHz dB
Signal-to-noise ratio: 85 dB
Protection circuits: Overtemperature , short circuit
Input impedance: 10,000 Ohm(s)
Controls: mains switch (on/off) , volume control
Indicators: orange (LED)
Line input connectors: 6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage: Switching power supply
Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
Cabinet material: Birch Plywood , MDF
Housing Wall Strength: 15 mm
Cabinet surface: Laminated , stained
Cabinet colour: Black
Cabinet construction: Bass Reflex
Width: 190 mm
Height: 268 mm
Depth: 215 mm
Weight: 3,95 kg
Low/mid driver dimensions: 5 "
Woofer size: 127 mm
Woofer magnet: 80 mm Ferrit
Woofer brand: Custom-made
HF driver dimensions: 0.75 "
HF Driver Size: 19 mm
HF driver magnet: 28 mm Neodym
HF driver brand: Custom-made
Power amplifier (Class A): Class A/B
Dispersion (H x V): 120 ° x 120 °
RMS: 2 x 30 W
Frequency response: 70 - 20.000 Hz
Crossover frequency: 2500 Hz
Max. SPL: 110 dBU @ 1 kHz dB
Signal-to-noise ratio: 85 dB
Protection circuits: Overtemperature , short circuit
Input impedance: 10,000 Ohm(s)
Controls: mains switch (on/off) , volume control
Indicators: orange (LED)
Line input connectors: 6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage: Switching power supply
Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
Cabinet material: Birch Plywood , MDF
Housing Wall Strength: 15 mm
Cabinet surface: Laminated , stained
Cabinet colour: Black
Cabinet construction: Bass Reflex
Width: 190 mm
Height: 268 mm
Depth: 215 mm
Weight: 3,95 kg
| Key attributes | |
|---|---|
| Speaker Size | 5"-7" |
| Max. Frequency Range | 20000Hz |
| Min. Frequency Range | 70Hz |
| Power | 50W - 499W |
| General Information | |
|---|---|
| Manufacturer information | Adam Hall GmbH
Adam-Hall-Strasse 1 61267 Neu-Anspach Germany sales@adamhall.com |
| Nearfield Monitor attributes | |
|---|---|
| Power Configuration | Bi-Amped |
| Configuration | Monitor |
| Type | Active |
| Output Types | XLR 1/4" |
| Input Types | XLR 1/4" |
| Max SPL | <114dB |
| Product Details | |
|---|---|
| Product Number | 210668 |
| Brand | |
| Category | |
| Brand Category | |
| Relevancy rank in Category Nearfield Monitor | |
| Date | March 2021 |
Related Products