Deals
Contact usMagazineFAQEventsJobs (3)
Deutschland
EN
Categories
  • Log in
Categories

The GigRig G3 / Pedalboard Switching System

The GigRig
EUR 1784.95
In backorder
Incl. VAT, free shipping
Product #234255
BrandThe GigRig
CategoryEffects Pedal Switch
Brand CategoryThe GigRig - Pedal Switchers
A new standard for effects pedal lovers seeking the ultimate control and tonal transparency.

G3 and G3 Atom mark a new standard in pedalboard effects control. Built on the legacy of the award winning G2, G3 delivers the ultimate in signal path purity with possibilities never before seen in a pedalboard switcher.

  • - 12 Passive True Bypass Effects Loops
  • 12 Passive True Bypass Matrix effects loops which can be paired for stereo effects, meaning you can have up to 6 stereo loops, 12 mono or combinations thereof
  • - True Stereo Delay Trails / Spillover
  • Stereo delay and reverb trails from any loop on any preset. Learn more from our video HERE
  • - Pre Gain
  • Programmable Pre Gain on every preset which can buffer, attenuate or boost the input to your effects. Can be switched entirely out too
  • - Switchable Outputs
  • 2 separate outputs. One is isolated and phase reversible so you'll have no earth hum or phase issues between your amps
  • - Zero Confusion
  • Select a preset switch, choose your effects, outputs, pre/post gain, additional control switching if you want…done! No menus, no save button. See our Set-Up video HERE
  • - Ultra High-Res TFT LCD Display
  • Ultra-Bright TFT LCD screen displaying Bank, Preset Number /Name and Pre/Post Gain levels and menu system (brightness adjustable)
  • - Up to 99 Banks of Presets
  • Up to 99 banks with up to 28 presets per bank. Can be configured for Preset or Stomp Box mode. That means unparalleled flexibility and control
  • - Bluetooth
  • Connect to the G3 iOS app through G3's built-in Bluetooth. Software updates, system back-ups, set-list editing all from your phone. For more information watch our APP VIDEO
  • - Post Gain
  • True stereo programmable Post Gain giving complete control over the master volume output of each preset
  • - GigRig Designed Optical Footswitches
  • Milled from stainless steel, our own-design OptoKick footswitch uses light instead of mechanics to do the footswitching, so there's nothing to break. We believe these are the most reliable footswitches in the world
  • - Full MIDI In and Out
  • Each preset can send up to 15 separate mappable PC and CC MIDI messages as well as 2 expression pedal inputs for realtime CC message control. Learn more from our MIDI VIDEO
  • - Built-in Parallel and Wet/Dry
  • - If Wet/Dry and parallel signals are your thing, you can do it all in G3 without the need for any external devices. Send different effects to different outputs, even phase correct your parallel signals

Power Requirements:
9V DC (2.1mm centre neg) @ 650mA. It is recommended the use of The GigRig Generator
power supply supplied with The G3 Switching System. (Strymon Zuma, True Tone 1-Spot and Voodoo Labs
Pedal Power 2 have been tested to power G3 sufficiently)
Input impedance:
3.3M Ohm
Out 1 - Signal path with input and output amps OFF – True Bypass
Out 1 is earthed and must always be connected to ground
Out 2 - Signal path with input and output amps OFF – Buffered and Isolated
Out 2 is transformer isolated and phase reversible
Input signal handling:
Maximum = 16.5V dBV peak to peak in true bypass
Signal Bandwidth = 4Hz to 150KHz
Pre Gain/Buffer and Post Gain Stereo VCA Output Amplifier/Buffer:
Minimum gain: -30dBu
Maximum Gain: +8dBu
Bandwidth at 1V = 4Hz to 150KHz
Buffer output impedance: 1K Ohms
Noise: 4.7nV per root Hz

Product Dimensions
Depth
78mm
Width
440mm
Height
130mm
Product Details
Product Number
234255
Brand
The GigRig
Category
Effects Pedal Switch
Brand Category
The GigRig - Pedal Switchers
Relevancy rank in Category Effects Pedal Switch
2 of 31
Date
February 2022
Dimension
Weight
2.6kg
Box Width
440mm
Gross Weight
3.46kg